Metric Tons to Liang (Chinese) (t to liang)
1 metric ton equals 20,000 liang (Chinese) exactly.
How to convert metric tons to liang (Chinese)
To convert metric tons to liang (Chinese), multiply the number of metric tons by 20,000. This factor is exact. To go the other way, multiply liang (Chinese) by 0.00005.
liang (Chinese) = metric tons × 20,000
Example: 10 metric tons = 200,000 liang (Chinese).
About these units
Metric Ton (t)
1,000 kilograms (about 2,204.6 lb), also spelled tonne. Used for cargo, grain and vehicle weights outside the US.
Barrels gave the tonne its name. The word goes back to a Germanic root for a large cask, the tun, and a full tun could easily weigh around a tonne. In English this became ton; the spelling tonne has been used in France since 1842, where it replaced the older tonneau, and pre-metric French tonnes were 2,000 livres, about 979 kg. Once the metric system took hold, the tonne was fixed at 1,000 kilograms, which is the mass of roughly a cubic metre of water.
The unit is accepted for use with the SI, and its symbol is a lowercase t with no period. Because it sits close to the old English ton, the two get confused: the short ton used in the US is about 10 percent lighter than a tonne, while the long ton differs by less than 2 percent. NIST calls the unit the metric ton, and the spelling tonne is rare in the US. Very large quantities are stated in prefixed forms such as the megatonne, which equals a teragram. In explosives, a tonne of TNT is taken as about 4.2 gigajoules.
1 metric ton = 1,000 kilograms (exactly).
Sources: Wikipedia: Tonne; Wikipedia: Ton; NIST Guide to the SI, Appendix B.8 (mass conversions)
Liang (Chinese) (liang)
Exactly 50 g in the modern Chinese market system, called the tael in English; one tenth of the modern jin (it was a sixteenth of the old jin).
English speakers know this unit as the tael, a word that came through Portuguese from the Malay tahil, meaning weight. In China the liang measured gold, silver and medicines, and it doubled as a unit of money when a liang of silver served as a unit of account. Foreign trade at Canton and Hong Kong carried the term around the world, and the name is still used for bullion weights.
For most of Chinese history the liang was one sixteenth of a jin, which is why people still speak of half a jin being eight liang in older sources. The Republic kept that ratio from 1930 with a liang of 31.25 g, but the People's Republic changed it in 1959 to one tenth of a jin. The figure used here is that mainland value of 50 g. Hong Kong's tael is about 37.8 g, while Taiwan uses 37.5 g.
1 liang (Chinese) = 0.05 kilograms (exactly).
Sources: Wikipedia: Tael; Wikipedia: Jin (unit); Wikipedia: Chinese units of measurement
Related conversions
- Liang (Chinese) to metric tons (reverse)
- Metric tons to kilograms
- Metric tons to grams
- Metric tons to pounds
- Metric tons to ounces
- Metric tons to milligrams
- Metric tons to micrograms
- Metric tons to carats
- Metric tons to stone
- Metric tons to short tons
- Metric tons to long tons
- Metric tons to troy ounces
- Metric tons to daltons
- Kilograms to liang (Chinese)
- Grams to liang (Chinese)
- Pounds to liang (Chinese)
- Ounces to liang (Chinese)
See all weight & mass units.