PSI to Millibars (psi to mbar)
1 pound per square inch equals 68.94757293 millibars (rounded).
How to convert pounds per square inch to millibars
To convert pounds per square inch to millibars, multiply the number of pounds per square inch by 68.94757293. The factor is rounded to 10 significant digits. To go the other way, multiply millibars by 0.01450377377 (rounded).
millibars = pounds per square inch × 68.94757293
Example: 10 pounds per square inch = 689.4757293 millibars.
About these units
Pound Per Square Inch (psi)
About 6,894.757 pascals. The common unit for tire pressure, hydraulics and gas pipelines in the US.
Unlike most pressure units, psi has no namesake: it simply spells out its own definition, one pound-force acting on one square inch, and it is based on avoirdupois units. Used mainly in the United States, it is about 6.895 kilopascals.
The letters after the unit matter. Psia is measured against a vacuum, while psig is measured against the surrounding air, so at sea level, where the atmosphere is about 14.7 psi, you add that amount to a gauge reading to get an absolute one. A bicycle tire at 65 psig is therefore at 79.7 psia, and the label psid means a difference between two pressures rather than a reference to ambient air.
Typical automobile tires are listed at about 32 psig, and road racing bicycle tires at about 120 psig. One standard atmosphere is 14.696 psi, which gives a feel for how many multiples of sea-level air those tire pressures represent.
1 pound per square inch = 6,894.757293 pascals (approximately).
Sources: Wikipedia: Pounds per square inch; Wikipedia: Standard atmosphere (unit)
Millibar (mbar)
One thousandth of a bar, equal to one hectopascal. Standard atmospheric pressure is 1,013.25 mbar.
Millibar and hectopascal are the same pressure with different pedigrees. The millibar was introduced alongside the bar by Vilhelm Bjerknes, and meteorologists worldwide adopted it because the values are convenient: a thousandth of a bar puts ordinary air pressure near 1,000. Standard atmospheric pressure is 1,013.25 millibars.
When SI came in, some meteorologists switched to hectopascals, which carry exactly the same numbers. The millibar did not vanish, though. The symbol mb is still common, and Americans know the unit from US hurricane and cyclone reports.
A few readings give the scale. The record-low non-tornadic pressure of 870 hPa in Typhoon Tip in 1979 equals 870 millibars, and falling pressure of about 12 hPa per 100 meters of altitude means a mountain road can shave tens of millibars off a barometer reading in a short climb.
1 millibar = 100 pascals (exactly).
Sources: Wikipedia: Bar (unit); Wikipedia: Hectopascal; Wikipedia: Atmospheric pressure
Related conversions
- Millibars to PSI (reverse)
- PSI to pascals
- PSI to kilopascals
- PSI to bars
- PSI to standard atmospheres
- PSI to hectopascals
- PSI to megapascals
- PSI to torr
- PSI to millimeters of mercury
- PSI to inches of mercury
- PSI to gigapascals
- PSI to kilopounds per square inch
- PSI to millimeters of water
- Pascals to millibars
- Kilopascals to millibars
- Bars to millibars
- Standard atmospheres to millibars
- Hectopascals to millibars
- Megapascals to millibars
- Torr to millibars
- Millimeters of mercury to millibars
- Inches of mercury to millibars
See all pressure units.