Megapascals to Millibars (MPa to mbar)

1 megapascal equals 10,000 millibars exactly.

1 megapascal = 10,000 millibars

How to convert megapascals to millibars

To convert megapascals to millibars, multiply the number of megapascals by 10,000. This factor is exact. To go the other way, multiply millibars by 0.0001.

millibars = megapascals × 10,000

Example: 10 megapascals = 100,000 millibars.

About these units

Megapascal (MPa)

Metric (SI)Current unit

One million pascals. Used for material strength and hydraulic pressure.

Engineers reach for the megapascal because the pascal is far too small for solid materials. It is the preferred unit in engineering for stiffness and for tensile or compressive strength, and stiffness figures go on to gigapascals: aluminium is given as 69 GPa, structural steel as 200 GPa, and diamond as 1,220 GPa.

Fluid systems live in the same range. One megapascal is 10 bar, so scuba tanks filled to about 200 bar sit at 20 MPa, and fixed industrial hydraulic machinery commonly working at around 300 bar runs at about 30 MPa. A kilobar, used in experimental petrology, is 100 MPa.

For comparison with units from the pounds-and-inches world, one psi is about 6.895 kPa, so a megapascal is about 145 psi.

1 megapascal = 1,000,000 pascals (exactly).

Sources: Wikipedia: Pascal (unit); Wikipedia: Bar (unit); Wikipedia: Pounds per square inch

Millibar (mbar)

Metric (SI)Current unit

One thousandth of a bar, equal to one hectopascal. Standard atmospheric pressure is 1,013.25 mbar.

Millibar and hectopascal are the same pressure with different pedigrees. The millibar was introduced alongside the bar by Vilhelm Bjerknes, and meteorologists worldwide adopted it because the values are convenient: a thousandth of a bar puts ordinary air pressure near 1,000. Standard atmospheric pressure is 1,013.25 millibars.

When SI came in, some meteorologists switched to hectopascals, which carry exactly the same numbers. The millibar did not vanish, though. The symbol mb is still common, and Americans know the unit from US hurricane and cyclone reports.

A few readings give the scale. The record-low non-tornadic pressure of 870 hPa in Typhoon Tip in 1979 equals 870 millibars, and falling pressure of about 12 hPa per 100 meters of altitude means a mountain road can shave tens of millibars off a barometer reading in a short climb.

1 millibar = 100 pascals (exactly).

Sources: Wikipedia: Bar (unit); Wikipedia: Hectopascal; Wikipedia: Atmospheric pressure

Related conversions

See all pressure units.