Hectopascals to Megapascals (hPa to MPa)

1 hectopascal equals 0.0001 megapascals exactly.

How to convert hectopascals to megapascals

To convert hectopascals to megapascals, multiply the number of hectopascals by 0.0001. This factor is exact. To go the other way, multiply megapascals by 10,000.

megapascals = hectopascals × 0.0001

Example: 10 hectopascals = 0.001 megapascals.

About these units

Hectopascal (hPa)

Metric (SI)Current unit

100 pascals, equal to one millibar. The standard unit in weather forecasts and barometers.

Weather forecasters rarely think in pascals, and the hectopascal exists largely to avoid changing their numbers. When SI arrived, meteorologists generally switched from the millibar to the hectopascal, which equals exactly 100 Pa and exactly one millibar, so existing readings carried over unchanged. Observations are typically reported in hPa, following the World Meteorological Organization recommendation, though many scientific fields dislike the hecto prefix because they prefer steps of 1,000.

A typical sea-level reading is about 1,013 hPa. The lowest non-tornadic pressure ever measured was 870 hPa, in Typhoon Tip on 12 October 1979, and the highest sea-level pressure, 1,084.8 hPa, came at Tosontsengel, Mongolia, on 19 December 2001, at a station above 750 meters. At low altitudes, pressure drops about 12 hPa for every 100 meters you climb.

Aviation weather reports, such as the QNH in a METAR, use hectopascals or millibars in most countries, while the US, Canada and Japan quote altimeter settings in inches of mercury.

1 hectopascal = 100 pascals (exactly).

Sources: Wikipedia: Hectopascal; Wikipedia: Atmospheric pressure; Wikipedia: Pascal (unit)

Megapascal (MPa)

Metric (SI)Current unit

One million pascals. Used for material strength and hydraulic pressure.

Engineers reach for the megapascal because the pascal is far too small for solid materials. It is the preferred unit in engineering for stiffness and for tensile or compressive strength, and stiffness figures go on to gigapascals: aluminium is given as 69 GPa, structural steel as 200 GPa, and diamond as 1,220 GPa.

Fluid systems live in the same range. One megapascal is 10 bar, so scuba tanks filled to about 200 bar sit at 20 MPa, and fixed industrial hydraulic machinery commonly working at around 300 bar runs at about 30 MPa. A kilobar, used in experimental petrology, is 100 MPa.

For comparison with units from the pounds-and-inches world, one psi is about 6.895 kPa, so a megapascal is about 145 psi.

1 megapascal = 1,000,000 pascals (exactly).

Sources: Wikipedia: Pascal (unit); Wikipedia: Bar (unit); Wikipedia: Pounds per square inch

Related conversions

See all pressure units.