Pascals to Megapascals (Pa to MPa)

1 pascal equals 0.000001 megapascals exactly.

1 pascal = 0.000001 megapascals

How to convert pascals to megapascals

To convert pascals to megapascals, multiply the number of pascals by 0.000001. This factor is exact. To go the other way, multiply megapascals by 1,000,000.

megapascals = pascals × 0.000001

Example: 10 pascals = 0.00001 megapascals.

About these units

Pascal (Pa)

Metric (SI)Current unit

The SI unit of pressure: one newton per square meter. A very small unit; atmospheric pressure is about 101,325 Pa.

Blaise Pascal never saw a pascal, because the name was adopted by the 14th CGPM in 1971 for the newton per square meter. He did, however, earn the honor. In 1647 he published experiments on the vacuum, and on 19 September 1648 his brother-in-law Florin Périer carried a mercury barometer up the Puy de Dôme near Clermont, where the column stood at about 23 inches against about 26 at the base. Pascal had reasoned that air pressure should fall with altitude, and the result confirmed it.

One pascal is a tiny pressure, so the unit is mostly met with prefixes. Standard atmospheric pressure is 101,325 Pa, a typical sea-level reading is about 1,013 hPa, and the threshold of hearing in air is taken as a reference pressure of 20 micropascals. Building airtightness tests, in contrast, are run at 50 Pa.

Pascal is also remembered for hydrostatics, where he showed that pressure depends on height difference rather than the weight of the fluid, and for the hydraulic press.

The pascal is the reference unit for pressure on this site.

Sources: Wikipedia: Pascal (unit); Wikipedia: Blaise Pascal

Megapascal (MPa)

Metric (SI)Current unit

One million pascals. Used for material strength and hydraulic pressure.

Engineers reach for the megapascal because the pascal is far too small for solid materials. It is the preferred unit in engineering for stiffness and for tensile or compressive strength, and stiffness figures go on to gigapascals: aluminium is given as 69 GPa, structural steel as 200 GPa, and diamond as 1,220 GPa.

Fluid systems live in the same range. One megapascal is 10 bar, so scuba tanks filled to about 200 bar sit at 20 MPa, and fixed industrial hydraulic machinery commonly working at around 300 bar runs at about 30 MPa. A kilobar, used in experimental petrology, is 100 MPa.

For comparison with units from the pounds-and-inches world, one psi is about 6.895 kPa, so a megapascal is about 145 psi.

1 megapascal = 1,000,000 pascals (exactly).

Sources: Wikipedia: Pascal (unit); Wikipedia: Bar (unit); Wikipedia: Pounds per square inch

Related conversions

See all pressure units.