Hectopascals to Bars (hPa to bar)

1 hectopascal equals 0.001 bars exactly.

How to convert hectopascals to bars

To convert hectopascals to bars, multiply the number of hectopascals by 0.001. This factor is exact. To go the other way, multiply bars by 1,000.

bars = hectopascals × 0.001

Example: 10 hectopascals = 0.01 bars.

About these units

Hectopascal (hPa)

Metric (SI)Current unit

100 pascals, equal to one millibar. The standard unit in weather forecasts and barometers.

Weather forecasters rarely think in pascals, and the hectopascal exists largely to avoid changing their numbers. When SI arrived, meteorologists generally switched from the millibar to the hectopascal, which equals exactly 100 Pa and exactly one millibar, so existing readings carried over unchanged. Observations are typically reported in hPa, following the World Meteorological Organization recommendation, though many scientific fields dislike the hecto prefix because they prefer steps of 1,000.

A typical sea-level reading is about 1,013 hPa. The lowest non-tornadic pressure ever measured was 870 hPa, in Typhoon Tip on 12 October 1979, and the highest sea-level pressure, 1,084.8 hPa, came at Tosontsengel, Mongolia, on 19 December 2001, at a station above 750 meters. At low altitudes, pressure drops about 12 hPa for every 100 meters you climb.

Aviation weather reports, such as the QNH in a METAR, use hectopascals or millibars in most countries, while the US, Canada and Japan quote altimeter settings in inches of mercury.

1 hectopascal = 100 pascals (exactly).

Sources: Wikipedia: Hectopascal; Wikipedia: Atmospheric pressure; Wikipedia: Pascal (unit)

Bar (bar)

Metric (SI)Current unit

Exactly 100,000 pascals, close to atmospheric pressure at sea level. Used for tire pressure, diving and industrial gauges.

Bar began as a name that meant different things to different people. It comes from the Ancient Greek baros, weight, and from 1793 to 1795 an early metric system used bar for a unit of mass equal to the modern tonne. The pressure bar was introduced by the Norwegian meteorologist Vilhelm Bjerknes, a founder of modern weather forecasting, who defined it as one megadyne per square centimeter. Some earlier writers had used bar for one dyne per square centimeter, a source of confusion.

The bar is a metric unit but not part of the SI, and its official symbol is simply bar, since the old b clashes with the barn and the bit. It has been legally recognized in EU countries since 2004, although NIST deprecates it except for limited use in meteorology.

Its size is handy because 1 bar is slightly less than average sea-level pressure, which is about 1.013 bar. In scuba diving every 10 meters of seawater adds about 1 bar and a full standard tank holds about 200 bar. Tire pressure and turbocharger boost are often quoted in bar outside the US.

1 bar = 100,000 pascals (exactly).

Sources: Wikipedia: Bar (unit); Wikipedia: Atmospheric pressure

Related conversions

See all pressure units.