Hectopascals to Kilopascals (hPa to kPa)

1 hectopascal equals 0.1 kilopascals exactly.

How to convert hectopascals to kilopascals

To convert hectopascals to kilopascals, multiply the number of hectopascals by 0.1. This factor is exact. To go the other way, multiply kilopascals by 10.

kilopascals = hectopascals × 0.1

Example: 10 hectopascals = 1 kilopascal.

About these units

Hectopascal (hPa)

Metric (SI)Current unit

100 pascals, equal to one millibar. The standard unit in weather forecasts and barometers.

Weather forecasters rarely think in pascals, and the hectopascal exists largely to avoid changing their numbers. When SI arrived, meteorologists generally switched from the millibar to the hectopascal, which equals exactly 100 Pa and exactly one millibar, so existing readings carried over unchanged. Observations are typically reported in hPa, following the World Meteorological Organization recommendation, though many scientific fields dislike the hecto prefix because they prefer steps of 1,000.

A typical sea-level reading is about 1,013 hPa. The lowest non-tornadic pressure ever measured was 870 hPa, in Typhoon Tip on 12 October 1979, and the highest sea-level pressure, 1,084.8 hPa, came at Tosontsengel, Mongolia, on 19 December 2001, at a station above 750 meters. At low altitudes, pressure drops about 12 hPa for every 100 meters you climb.

Aviation weather reports, such as the QNH in a METAR, use hectopascals or millibars in most countries, while the US, Canada and Japan quote altimeter settings in inches of mercury.

1 hectopascal = 100 pascals (exactly).

Sources: Wikipedia: Hectopascal; Wikipedia: Atmospheric pressure; Wikipedia: Pascal (unit)

Kilopascal (kPa)

Metric (SI)Current unit

1,000 pascals. Used for tire pressures, weather reports in many countries and engineering.

Kilopascal is the form of the pascal that most people actually use. The pascal itself is very small, so outside meteorology the kilopascal became the common choice in most fields, and it equals one centibar. Medical elastography reports tissue stiffness in kPa, and Canada reports atmospheric pressure in kPa rather than hectopascals.

A standard atmosphere is 101.325 kPa. In 1982 IUPAC recommended a different reference for chemistry, a standard pressure of exactly 100 kPa, which split the older convention of 1 atm into two competing standards.

Blood pressure shows how the units line up. One mmHg is 0.13332 kPa, and a normal reading is below about 16.0 kPa systolic and 10.7 kPa diastolic, the same thing as the familiar 120 over 80 in millimeters of mercury.

1 kilopascal = 1,000 pascals (exactly).

Sources: Wikipedia: Pascal (unit); Wikipedia: Standard atmosphere (unit); Wikipedia: Millimetre of mercury

Related conversions

See all pressure units.