Kilopascals to Bars (kPa to bar)
1 kilopascal equals 0.01 bars exactly.
How to convert kilopascals to bars
To convert kilopascals to bars, multiply the number of kilopascals by 0.01. This factor is exact. To go the other way, multiply bars by 100.
bars = kilopascals × 0.01
Example: 10 kilopascals = 0.1 bars.
About these units
Kilopascal (kPa)
1,000 pascals. Used for tire pressures, weather reports in many countries and engineering.
Kilopascal is the form of the pascal that most people actually use. The pascal itself is very small, so outside meteorology the kilopascal became the common choice in most fields, and it equals one centibar. Medical elastography reports tissue stiffness in kPa, and Canada reports atmospheric pressure in kPa rather than hectopascals.
A standard atmosphere is 101.325 kPa. In 1982 IUPAC recommended a different reference for chemistry, a standard pressure of exactly 100 kPa, which split the older convention of 1 atm into two competing standards.
Blood pressure shows how the units line up. One mmHg is 0.13332 kPa, and a normal reading is below about 16.0 kPa systolic and 10.7 kPa diastolic, the same thing as the familiar 120 over 80 in millimeters of mercury.
1 kilopascal = 1,000 pascals (exactly).
Sources: Wikipedia: Pascal (unit); Wikipedia: Standard atmosphere (unit); Wikipedia: Millimetre of mercury
Bar (bar)
Exactly 100,000 pascals, close to atmospheric pressure at sea level. Used for tire pressure, diving and industrial gauges.
Bar began as a name that meant different things to different people. It comes from the Ancient Greek baros, weight, and from 1793 to 1795 an early metric system used bar for a unit of mass equal to the modern tonne. The pressure bar was introduced by the Norwegian meteorologist Vilhelm Bjerknes, a founder of modern weather forecasting, who defined it as one megadyne per square centimeter. Some earlier writers had used bar for one dyne per square centimeter, a source of confusion.
The bar is a metric unit but not part of the SI, and its official symbol is simply bar, since the old b clashes with the barn and the bit. It has been legally recognized in EU countries since 2004, although NIST deprecates it except for limited use in meteorology.
Its size is handy because 1 bar is slightly less than average sea-level pressure, which is about 1.013 bar. In scuba diving every 10 meters of seawater adds about 1 bar and a full standard tank holds about 200 bar. Tire pressure and turbocharger boost are often quoted in bar outside the US.
1 bar = 100,000 pascals (exactly).
Sources: Wikipedia: Bar (unit); Wikipedia: Atmospheric pressure
Related conversions
- Bars to kilopascals (reverse)
- Kilopascals to pascals
- Kilopascals to standard atmospheres
- Kilopascals to PSI
- Kilopascals to hectopascals
- Kilopascals to megapascals
- Kilopascals to millibars
- Kilopascals to torr
- Kilopascals to millimeters of mercury
- Kilopascals to inches of mercury
- Kilopascals to gigapascals
- Kilopascals to kilopounds per square inch
- Kilopascals to millimeters of water
- Pascals to bars
- Standard atmospheres to bars
- PSI to bars
- Hectopascals to bars
- Megapascals to bars
- Millibars to bars
- Torr to bars
- Millimeters of mercury to bars
- Inches of mercury to bars
- Gigapascals to bars
- Kilopounds per square inch to bars
- Millimeters of water to bars
See all pressure units.