US Survey Feet to Centimeters (ft (US) to cm)

1 US survey foot equals 30.48006096 centimeters (rounded).

1 US survey foot = 30.48006096 centimeters

How to convert US survey feet to centimeters

To convert US survey feet to centimeters, multiply the number of US survey feet by 30.48006096. The factor is rounded to 10 significant digits. To go the other way, multiply centimeters by 0.03280833333 (rounded).

centimeters = US survey feet × 30.48006096

Example: 10 US survey feet = 304.8006096 centimeters.

About these units

US Survey Foot (ft (US))

US land surveyHistorical unit (no longer in standard use)

Exactly 1200/3937 meters, about 2 parts per million longer than the international foot. Retired in the US at the end of 2022 but still found in older land records.

Two feet coexisted in the United States for sixty-three years. The Mendenhall Order of 1893 tied American units to the metre at 39.37 inches to the metre, which makes the survey foot exactly 1200/3937 m, about 0.3048006 m. In 1959 the international foot was set at exactly 0.3048 m for industry and trade, but the older foot was kept for geodetic work until control networks could be readjusted. That readjustment was finished in 1986, yet the survey foot stayed in use.

The two differ by about 2 parts per million. That is trivial for a house lot but adds up in the State Plane Coordinate System, where coordinates can lie hundreds of thousands of feet from their origin. NIST and the National Geodetic Survey announced that the survey foot should not be used after December 31, 2022, with the international foot replacing it, leaving it for historic and legacy data. Before that, state laws varied: about 40 of 56 jurisdictions based surveying on the survey foot, six on the international foot, and ten did not specify.

1 US survey foot = 0.3048006096 meters (approximately).

Sources: NIST: U.S. survey foot; Wikipedia: Foot (unit)

Centimeter (cm)

Metric (SI)Current unit

One hundredth of a meter. Used for body measurements, clothing and everyday objects.

Scientists, rather than shopkeepers, gave the centimeter its place. In 1832 Carl Friedrich Gauss proposed a system of absolute units built on length, mass and time, choosing the millimeter, milligram and second. In 1873 a committee of the British Association for the Advancement of Science, whose members included James Clerk Maxwell and William Thomson (Lord Kelvin), recommended the centimeter, gram and second instead. That CGS system dominated physics for decades, until the metre-kilogram-second system replaced it in the mid-twentieth century and led to SI.

CGS units proved awkward for rooms and buildings, which run to hundreds of centimeters, but the centimeter itself never went away. It is still the everyday unit for height, clothing and small objects, and it appears in map scales and rainfall reports. An adult fingernail is roughly one centimeter wide, and a milliliter is defined as exactly one cubic centimeter. An inch is exactly 2.54 centimeters. The CGS system itself survives mainly in theoretical physics and astrophysics, where Gaussian units are still common.

1 centimeter = 0.01 meters (exactly).

Sources: Wikipedia: Centimetre-gram-second system of units; Wikipedia: Centimetre; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.