US Survey Feet to Meters (ft (US) to m)

1 US survey foot equals 0.3048006096 meters (rounded).

1 US survey foot = 0.3048006096 meters

How to convert US survey feet to meters

To convert US survey feet to meters, multiply the number of US survey feet by 0.3048006096. The factor is rounded to 10 significant digits. To go the other way, multiply meters by 3.280833333 (rounded).

meters = US survey feet × 0.3048006096

Example: 10 US survey feet = 3.048006096 meters.

About these units

US Survey Foot (ft (US))

US land surveyHistorical unit (no longer in standard use)

Exactly 1200/3937 meters, about 2 parts per million longer than the international foot. Retired in the US at the end of 2022 but still found in older land records.

Two feet coexisted in the United States for sixty-three years. The Mendenhall Order of 1893 tied American units to the metre at 39.37 inches to the metre, which makes the survey foot exactly 1200/3937 m, about 0.3048006 m. In 1959 the international foot was set at exactly 0.3048 m for industry and trade, but the older foot was kept for geodetic work until control networks could be readjusted. That readjustment was finished in 1986, yet the survey foot stayed in use.

The two differ by about 2 parts per million. That is trivial for a house lot but adds up in the State Plane Coordinate System, where coordinates can lie hundreds of thousands of feet from their origin. NIST and the National Geodetic Survey announced that the survey foot should not be used after December 31, 2022, with the international foot replacing it, leaving it for historic and legacy data. Before that, state laws varied: about 40 of 56 jurisdictions based surveying on the survey foot, six on the international foot, and ten did not specify.

1 US survey foot = 0.3048006096 meters (approximately).

Sources: NIST: U.S. survey foot; Wikipedia: Foot (unit)

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Related conversions

See all length units.