Cubits to Meters (cbt to m)

1 cubit equals 0.4572 meters exactly.

1 cubit = 0.4572 meters

How to convert cubits to meters

To convert cubits to meters, multiply the number of cubits by 0.4572. This factor is exact. To go the other way, multiply meters by 2.187226597 (rounded).

meters = cubits × 0.4572

Example: 10 cubits = 4.572 meters.

Approximate value. Standards for the cubit varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Cubit (cbt)

Medieval EnglishHistorical unit (no longer in standard use)Approximate value

Traditionally the length from the elbow to the tip of the middle finger. The common English cubit is taken as 18 inches (45.72 cm); ancient cubits ranged from about 44 to 53 cm.

From the Latin cubitum, meaning elbow, the cubit was the forearm measured from the elbow to the fingertips. English use tied it to roughly 18 inches, or 45.72 cm. Such a hand-and-arm measure is the same idea that produced the ell, which Wikipedia describes as originally a cubit.

No single value ever governed it. Wikipedia lists most ancient cubits between 44.4 and 52.92 cm, from the Roman cubitus of about 444 mm, which Vitruvius set at one and a half Roman feet, to the Egyptian royal cubit near 523 to 529 mm. Medieval Islamic cubits ranged far wider still.

The English ell eventually settled at 45 inches, one and a quarter yards, while the cubit faded from commerce. A trace survives in hedgelaying, where a forearm of about 18 inches sets the spacing of stakes. The figure used here is the 18 inch English cubit.

1 cubit = 0.4572 meters (approximately).

Sources: Wikipedia: Cubit; Wikipedia: Ell

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Related conversions

See all length units.