Cubits to Yards (cbt to yd)

1 cubit equals 0.5 yards exactly.

1 cubit = 0.5 yards

How to convert cubits to yards

To convert cubits to yards, multiply the number of cubits by 0.5. This factor is exact. To go the other way, multiply yards by 2.

yards = cubits × 0.5

Example: 10 cubits = 5 yards.

Approximate value. Standards for the cubit varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Cubit (cbt)

Medieval EnglishHistorical unit (no longer in standard use)Approximate value

Traditionally the length from the elbow to the tip of the middle finger. The common English cubit is taken as 18 inches (45.72 cm); ancient cubits ranged from about 44 to 53 cm.

From the Latin cubitum, meaning elbow, the cubit was the forearm measured from the elbow to the fingertips. English use tied it to roughly 18 inches, or 45.72 cm. Such a hand-and-arm measure is the same idea that produced the ell, which Wikipedia describes as originally a cubit.

No single value ever governed it. Wikipedia lists most ancient cubits between 44.4 and 52.92 cm, from the Roman cubitus of about 444 mm, which Vitruvius set at one and a half Roman feet, to the Egyptian royal cubit near 523 to 529 mm. Medieval Islamic cubits ranged far wider still.

The English ell eventually settled at 45 inches, one and a quarter yards, while the cubit faded from commerce. A trace survives in hedgelaying, where a forearm of about 18 inches sets the spacing of stakes. The figure used here is the 18 inch English cubit.

1 cubit = 0.4572 meters (approximately).

Sources: Wikipedia: Cubit; Wikipedia: Ell

Yard (yd)

US & ImperialCurrent unit

3 feet or 36 inches, exactly 0.9144 meters. Used for sports fields, fabric and short distances in the US and UK.

Yard descends from the Old English gerd or gyrd, meaning a branch, stave or measuring rod. It first appears in the late seventh-century laws of Ine of Wessex, though there it names a tax unit, the yardland. Around 959 to 963 King Edgar ordered that the measure held at Winchester be used throughout his realm, the earliest record of a prototype. A story that Henry I fixed the yard as the distance from his nose to his thumb is later folklore, and the true origin, whether pace, cubit or waist, remains speculative.

Britain defined the Imperial Standard Yard in 1824 as the distance between two marks on a brass rod at 62 degrees Fahrenheit. A fire in 1834 damaged the standard, a replacement was made in 1845, and the Weights and Measures Act 1855 recognized it. The 1959 international agreement then fixed the yard at exactly 0.9144 meter. Today it measures American and Canadian football fields, association football pitches and cricket pitches, appears on UK road signs for short distances, and is still used to sell fabric in the US and UK.

1 yard = 0.9144 meters (exactly).

Sources: Wikipedia: Yard; Wikipedia: Inch; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.