Nautical Miles to Meters (nmi to m)

1 nautical mile equals 1,852 meters exactly.

1 nautical mile = 1,852 meters

How to convert nautical miles to meters

To convert nautical miles to meters, multiply the number of nautical miles by 1,852. This factor is exact. To go the other way, multiply meters by 0.0005399568035 (rounded).

meters = nautical miles × 1,852

Example: 10 nautical miles = 18,520 meters.

About these units

Nautical Mile (nmi)

NauticalCurrent unit

Exactly 1,852 meters, close to one minute of latitude. The standard unit of distance at sea and in aviation; one nautical mile per hour is one knot.

Sailors wanted a distance that matched their charts, so the nautical mile was tied to the globe itself: one minute of arc, one sixtieth of a degree, of latitude. Earth's polar circumference is therefore close to 21,600 nautical miles. Because Earth is flattened at the poles, a minute of latitude is about 1,843 meters at the equator and about 1,862 at the poles, so the fixed value of 1,852 meters is a compromise. France's definition of the meter produced a figure near 1,851.85 meters, which helped set the number.

The First International Extraordinary Hydrographic Conference in Monaco defined the international nautical mile as exactly 1,852 meters in 1929. The United States kept its own variant until 1954, and the United Kingdom adopted the international value in 1970. A speed of one nautical mile per hour is one knot. The unit is not part of SI but remains the norm in air, marine and space navigation and in defining territorial waters, because distances on a chart can be read straight off the latitude scale. Its symbols vary: NM, nmi and M all appear.

1 nautical mile = 1,852 meters (exactly).

Sources: Wikipedia: Nautical mile; NIST Guide to the SI, Appendix B.8: conversion factors

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Related conversions

See all length units.