Imperial Pints to Imperial Gallons (pt (UK) to gal (UK))

1 imperial pint equals 0.125 imperial gallons exactly.

1 imperial pint = 0.125 imperial gallons

How to convert imperial pints to imperial gallons

To convert imperial pints to imperial gallons, multiply the number of imperial pints by 0.125. This factor is exact. To go the other way, multiply imperial gallons by 8.

imperial gallons = imperial pints × 0.125

Example: 10 imperial pints = 1.25 imperial gallons.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Imperial Pint (pt (UK))

Imperial (British)Current unit

Exactly 568.26125 mL (20 imperial fluid ounces). The pint of beer and milk in the UK and Ireland.

The imperial pint derives from Parliament's 1824 decision to replace Britain's assorted gallons with one defined by ten pounds of water at 62 degrees Fahrenheit. A pint is one eighth of that gallon and holds 20 imperial fluid ounces, or exactly 568.26125 milliliters. The word reached English from French pinte, which in modern French now means half a liter, while Canadian French uses it for the imperial quart.

That pint is about 20 percent larger than the US liquid pint of 473 mL, so a pint in Dublin or London buys noticeably more beer than one in Chicago. When Britain metricated, the pint was kept for draught beer and cider and for milk in returnable bottles, and draught beer has to be served in measured, stamped glasses. Culturally the pint is more than a measure: it is shorthand for a night at the pub.

1 imperial pint = 0.56826125 liters (exactly).

Sources: Wikipedia: Pint; UK Weights and Measures Act 1985, Schedule 1

Imperial Gallon (gal (UK))

Imperial (British)Current unit

Exactly 4.54609 liters, the volume of 10 pounds of water. Used for fuel economy in the UK (miles per gallon) and historically across the Commonwealth.

Britain unified its confusing gallons by act of Parliament in 1824. Before then, the country used separate ones for wine at 231 cubic inches, ale at 282 and corn at about 268.8. The 1824 reform replaced them with the imperial gallon, defined as the volume of ten pounds of distilled water, calculated at 277.274 cubic inches. A new definition in 1889 slightly changed that, and after the liter was restored to exactly a cubic decimeter in 1964, Canada and then the UK in 1976 adopted the exact value of 4.54609 liters.

Because the United States kept the 231-cubic-inch wine gallon, an imperial gallon is about 20 percent larger than a US gallon. That explains why a car rated at 40 miles per gallon in Britain is less impressive in American terms, since it comes to roughly 33 US miles per gallon. Ireland dropped the gallon as a primary trade unit at the end of 1993 and the UK at the end of September 1995, but it lives on in British fuel-economy figures and older recipes.

1 imperial gallon = 4.54609 liters (exactly).

Sources: Wikipedia: Gallon; UK Weights and Measures Act 1985, Schedule 1

Related conversions

See all volume units.