Cubic Meters to Imperial Gallons (m³ to gal (UK))

1 cubic meter equals 219.9692483 imperial gallons (rounded).

1 cubic meter = 219.9692483 imperial gallons

How to convert cubic meters to imperial gallons

To convert cubic meters to imperial gallons, multiply the number of cubic meters by 219.9692483. The factor is rounded to 10 significant digits. To go the other way, multiply imperial gallons by 0.00454609.

imperial gallons = cubic meters × 219.9692483

Example: 10 cubic meters = 2,199.692483 imperial gallons.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Meter (m³)

Metric (SI)Current unit

The SI derived unit of volume: 1,000 liters. Used for water supply, gas, concrete and shipping space.

When the metric system was set up, the cube whose edge is one meter became its natural large unit of volume. A cubic meter also went by other names: kiloliter, now rarely used, and stere, still applied to stacked firewood. In modern SI it is the coherent derived unit of volume, and the liter is a convenience unit defined from it as one thousandth of a cubic meter.

A cubic meter is large by everyday standards. It holds 1,000 liters, and pure water at its densest weighs almost exactly one tonne in that space, which is how the metric tonne and the cubic meter ended up so conveniently paired. It is the unit of choice for water supply, gas, timber, concrete and shipping space, where freight is often quoted in CBM. For a picture, about 6.29 oil barrels or 264 US gallons fit in one, and an Olympic swimming pool, at least 2 meters deep, holds roughly 2,500 of them.

1 cubic meter = 1,000 liters (exactly).

Sources: Wikipedia: Cubic metre; Wikipedia: Olympic-size swimming pool; NIST Guide to the SI, Chapter 5: units outside the SI

Imperial Gallon (gal (UK))

Imperial (British)Current unit

Exactly 4.54609 liters, the volume of 10 pounds of water. Used for fuel economy in the UK (miles per gallon) and historically across the Commonwealth.

Britain unified its confusing gallons by act of Parliament in 1824. Before then, the country used separate ones for wine at 231 cubic inches, ale at 282 and corn at about 268.8. The 1824 reform replaced them with the imperial gallon, defined as the volume of ten pounds of distilled water, calculated at 277.274 cubic inches. A new definition in 1889 slightly changed that, and after the liter was restored to exactly a cubic decimeter in 1964, Canada and then the UK in 1976 adopted the exact value of 4.54609 liters.

Because the United States kept the 231-cubic-inch wine gallon, an imperial gallon is about 20 percent larger than a US gallon. That explains why a car rated at 40 miles per gallon in Britain is less impressive in American terms, since it comes to roughly 33 US miles per gallon. Ireland dropped the gallon as a primary trade unit at the end of 1993 and the UK at the end of September 1995, but it lives on in British fuel-economy figures and older recipes.

1 imperial gallon = 4.54609 liters (exactly).

Sources: Wikipedia: Gallon; UK Weights and Measures Act 1985, Schedule 1

Related conversions

See all volume units.