Cubic Yards to Milliliters (yd³ to mL)

1 cubic yard equals 764,554.858 milliliters (rounded).

1 cubic yard = 764,554.858 milliliters

How to convert cubic yards to milliliters

To convert cubic yards to milliliters, multiply the number of cubic yards by 764,554.858. The factor is rounded to 10 significant digits. To go the other way, multiply milliliters by 0.000001307950619 (rounded).

milliliters = cubic yards × 764,554.858

Example: 10 cubic yards = 7,645,548.58 milliliters.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Yard (yd³)

US & ImperialCurrent unit

27 cubic feet or 764.555 liters. Used for soil, gravel and concrete in the US.

Cubic yard is a cube three feet on each side, which makes it exactly 27 cubic feet or 46,656 cubic inches. In metric terms it is about 0.7646 cubic meters, or 764.55 liters. The unit follows the yard in the United States and Canada, and British railways once rated ballast wagons by it, with one Great Western Railway wagon holding 8 cubic yards.

A cubic yard is easier to picture than the number suggests. It holds about 202 US gallons, or nearly five oil barrels. That is a scale where bulk materials such as soil, gravel, mulch and concrete are naturally counted, so a patio slab or garden bed needs a handful of them. A handy rule of thumb follows from the arithmetic: one cubic yard spread one inch deep covers 324 square feet.

1 cubic yard = 764.554858 liters (approximately).

Sources: Wikipedia: Cubic yard; NIST SP 811, Appendix B.8: conversion factors for volume

Milliliter (mL)

Metric (SI)Current unit

One thousandth of a liter, or exactly 1 cubic centimeter. Used for medicine, cooking and small containers.

Milliliters inherit everything from the liter, since the prefix simply means one thousandth. Because the liter is a cubic decimeter, a milliliter works out to exactly one cubic centimeter, a coincidence the metric system built in on purpose so that volume, length and mass interlock. One milliliter of water has a mass of about one gram, so a dosing syringe, a kitchen scale and a measuring jug can all be checked against one another.

Today milliliters dominate wherever small amounts must be measured precisely: medicine, flavorings, perfume, shampoo and the fine print on drink labels. Spelling is a mild regional split, with uppercase mL preferred in the United States, Canada and Australia and lowercase ml common in the UK and Europe. For scale, a US teaspoon is just under 5 mL, a US tablespoon is about 14.8 mL, and the US nutrition-label cup is exactly 240 mL, so one such cup is 240 of these tiny units.

1 milliliter = 0.001 liters (exactly).

Sources: Wikipedia: Litre; NIST SP 811, Appendix B.8: conversion factors for volume; 21 CFR 101.9: nutrition labeling household measures

Related conversions

See all volume units.