Cubic Meters to US Tablespoons (m³ to tbsp)
1 cubic meter equals 67,628.0454 US tablespoons (rounded).
How to convert cubic meters to US tablespoons
To convert cubic meters to US tablespoons, multiply the number of cubic meters by 67,628.0454. The factor is rounded to 10 significant digits. To go the other way, multiply US tablespoons by 0.00001478676478 (rounded).
US tablespoons = cubic meters × 67,628.0454
Example: 10 cubic meters = 676,280.454 US tablespoons.
Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.
About these units
Cubic Meter (m³)
The SI derived unit of volume: 1,000 liters. Used for water supply, gas, concrete and shipping space.
When the metric system was set up, the cube whose edge is one meter became its natural large unit of volume. A cubic meter also went by other names: kiloliter, now rarely used, and stere, still applied to stacked firewood. In modern SI it is the coherent derived unit of volume, and the liter is a convenience unit defined from it as one thousandth of a cubic meter.
A cubic meter is large by everyday standards. It holds 1,000 liters, and pure water at its densest weighs almost exactly one tonne in that space, which is how the metric tonne and the cubic meter ended up so conveniently paired. It is the unit of choice for water supply, gas, timber, concrete and shipping space, where freight is often quoted in CBM. For a picture, about 6.29 oil barrels or 264 US gallons fit in one, and an Olympic swimming pool, at least 2 meters deep, holds roughly 2,500 of them.
1 cubic meter = 1,000 liters (exactly).
Sources: Wikipedia: Cubic metre; Wikipedia: Olympic-size swimming pool; NIST Guide to the SI, Chapter 5: units outside the SI
US Tablespoon (tbsp)
Half a US fluid ounce (14.787 mL), equal to 3 teaspoons.
A tablespoon was once a spoon first and a unit second. Tablespoons entered place settings around 1700, first reserved for soup, and in the 18th century apothecaries used an unofficial tablespoon of four fluid drams, or half a fluid ounce. That is the origin of the modern US definition, which turns the spoon into precisely half a US fluid ounce.
The US tablespoon is therefore 14.7868 milliliters, equal to three US teaspoons, and sixteen of them make a US customary cup. It is often treated as 15 mL, and American nutrition labels define a tablespoon as exactly 15 mL, so the two figures sit within about 1.4 percent of each other. The regional difference that matters is Australia, which uses a larger 20 milliliter tablespoon, so a recipe asking for a tablespoon of oil or baking powder can go wrong when translated across the Pacific.
1 US tablespoon = 0.01478676478 liters (approximately).
Sources: Wikipedia: Tablespoon; NIST SP 811, Appendix B.8: conversion factors for volume; 21 CFR 101.9: nutrition labeling household measures
Related conversions
- US tablespoons to cubic meters (reverse)
- Cubic meters to liters
- Cubic meters to milliliters
- Cubic meters to US gallons
- Cubic meters to US cups
- Cubic meters to US fluid ounces
- Cubic meters to cubic centimeters
- Cubic meters to US quarts
- Cubic meters to US pints
- Cubic meters to US teaspoons
- Cubic meters to metric cups
- Cubic meters to metric tablespoons
- Cubic meters to metric teaspoons
- Liters to US tablespoons
- Milliliters to US tablespoons
- US gallons to US tablespoons
- US cups to US tablespoons
- US fluid ounces to US tablespoons
- Cubic centimeters to US tablespoons
- US quarts to US tablespoons
- US pints to US tablespoons
- US teaspoons to US tablespoons
- Metric cups to US tablespoons
- Metric tablespoons to US tablespoons
- Metric teaspoons to US tablespoons
See all volume units.