Cubic Feet to Cubic Inches (ft³ to in³)

1 cubic foot equals 1,728 cubic inches exactly.

1 cubic foot = 1,728 cubic inches

How to convert cubic feet to cubic inches

To convert cubic feet to cubic inches, multiply the number of cubic feet by 1,728. This factor is exact. To go the other way, multiply cubic inches by 0.0005787037037 (rounded).

cubic inches = cubic feet × 1,728

Example: 10 cubic feet = 17,280 cubic inches.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Foot (ft³)

US & ImperialCurrent unit

Exactly 28.316846592 liters (1,728 cubic inches). Used for refrigerator capacity, gas volume and shipping.

Cubic foot grew from the foot itself, a length unit with ancient origins, cubed into a volume of 1,728 cubic inches. Since the international foot was fixed at exactly 0.3048 meters, it equals exactly 28.316846592 liters. It sits at the center of the Anglo-American cubic system, a cube you could build from twelve-inch rulers, and it is about 7.48 US gallons or 6.23 imperial gallons.

In practice the cubic foot is the language of capacity and flow. Natural gas and household water are often billed per hundred cubic feet, written CCF, while gas reserves are reported in thousands and trillions of cubic feet. Rivers are measured in cubic feet per second, called cusecs, and fans and air compressors are rated in cubic feet per minute. To picture one, imagine a box a foot on each side holding a bit under seven and a half gallon jugs of water.

1 cubic foot = 28.31684659 liters (approximately).

Sources: Wikipedia: Cubic foot; NIST SP 811, Appendix B.8: conversion factors for volume

Cubic Inch (in³)

US & ImperialCurrent unit

Exactly 16.387064 mL. Used for engine displacement in the US and for small mechanical parts.

Cubic inch is a unit defined by a ruler. Take an inch, build a cube, and its volume is exactly 16.387064 milliliters under the modern definition of the inch as 25.4 millimeters. Its main role in history is as the building block behind other US volumes: the US gallon is defined as 231 cubic inches, so a cubic inch is exactly 1/231 of a gallon. Even the 42-gallon oil barrel works out to precisely 9,702 of them.

The cubic inch survives most visibly in American engines, which are abbreviated c.i.d. for cubic inch displacement, while the rest of the world and many modern automakers speak in liters. A 5.7 liter engine is about 350 cubic inches, a conversion made easy by the exact factor of 16.387064. Small mechanical parts are also sized in cubic inches in North America.

1 cubic inch = 0.016387064 liters (exactly).

Sources: Wikipedia: Cubic inch; NIST SP 811, Appendix B.8: conversion factors for volume

Related conversions

See all volume units.