Cubic Feet to Milliliters (ft³ to mL)

1 cubic foot equals 28,316.84659 milliliters (rounded).

1 cubic foot = 28,316.84659 milliliters

How to convert cubic feet to milliliters

To convert cubic feet to milliliters, multiply the number of cubic feet by 28,316.84659. The factor is rounded to 10 significant digits. To go the other way, multiply milliliters by 0.00003531466672 (rounded).

milliliters = cubic feet × 28,316.84659

Example: 10 cubic feet = 283,168.4659 milliliters.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Foot (ft³)

US & ImperialCurrent unit

Exactly 28.316846592 liters (1,728 cubic inches). Used for refrigerator capacity, gas volume and shipping.

Cubic foot grew from the foot itself, a length unit with ancient origins, cubed into a volume of 1,728 cubic inches. Since the international foot was fixed at exactly 0.3048 meters, it equals exactly 28.316846592 liters. It sits at the center of the Anglo-American cubic system, a cube you could build from twelve-inch rulers, and it is about 7.48 US gallons or 6.23 imperial gallons.

In practice the cubic foot is the language of capacity and flow. Natural gas and household water are often billed per hundred cubic feet, written CCF, while gas reserves are reported in thousands and trillions of cubic feet. Rivers are measured in cubic feet per second, called cusecs, and fans and air compressors are rated in cubic feet per minute. To picture one, imagine a box a foot on each side holding a bit under seven and a half gallon jugs of water.

1 cubic foot = 28.31684659 liters (approximately).

Sources: Wikipedia: Cubic foot; NIST SP 811, Appendix B.8: conversion factors for volume

Milliliter (mL)

Metric (SI)Current unit

One thousandth of a liter, or exactly 1 cubic centimeter. Used for medicine, cooking and small containers.

Milliliters inherit everything from the liter, since the prefix simply means one thousandth. Because the liter is a cubic decimeter, a milliliter works out to exactly one cubic centimeter, a coincidence the metric system built in on purpose so that volume, length and mass interlock. One milliliter of water has a mass of about one gram, so a dosing syringe, a kitchen scale and a measuring jug can all be checked against one another.

Today milliliters dominate wherever small amounts must be measured precisely: medicine, flavorings, perfume, shampoo and the fine print on drink labels. Spelling is a mild regional split, with uppercase mL preferred in the United States, Canada and Australia and lowercase ml common in the UK and Europe. For scale, a US teaspoon is just under 5 mL, a US tablespoon is about 14.8 mL, and the US nutrition-label cup is exactly 240 mL, so one such cup is 240 of these tiny units.

1 milliliter = 0.001 liters (exactly).

Sources: Wikipedia: Litre; NIST SP 811, Appendix B.8: conversion factors for volume; 21 CFR 101.9: nutrition labeling household measures

Related conversions

See all volume units.