Spans to Meters (span to m)

1 span equals 0.2286 meters exactly.

1 span = 0.2286 meters

How to convert spans to meters

To convert spans to meters, multiply the number of spans by 0.2286. This factor is exact. To go the other way, multiply meters by 4.374453193 (rounded).

meters = spans × 0.2286

Example: 10 spans = 2.286 meters.

About these units

Span (span)

Medieval EnglishHistorical unit (no longer in standard use)

9 inches (22.86 cm), the distance from the tip of the thumb to the tip of the little finger of a spread hand.

Stretch your fingers as wide as they go and the gap from thumb tip to little fingertip is a span. The English word descends from Old English spann and a Proto-Germanic form meaning handbreadth, itself tied to a root meaning to stretch. Greek writers had spithame, which appears in Herodotus in the 5th century BC, and Hesiod used a word meaning three spans long three centuries earlier. Ancient systems treated the span as half a cubit, or three palms.

The English handspan is 9 inches, or 22.86 cm, and Wiktionary notes it as an eighth of a fathom. That is the figure used here, though a hand's reach differs from person to person and other countries' spans differ too: about 23 cm for a Slovenian great span, 17.8 cm for the Russian piad, and 15 to 20 cm in Chinese usage. A little or short span, from thumb to index finger, was much smaller. The unit is now mostly a figure of speech, as in the span of a bridge or of a wing.

1 span = 0.2286 meters (exactly).

Sources: Wikipedia: Span (unit); Wiktionary: span

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Related conversions

See all length units.