Roman Feet to Centimeters (pes to cm)

1 Roman foot equals 29.6 centimeters exactly.

1 Roman foot = 29.6 centimeters

How to convert Roman feet to centimeters

To convert Roman feet to centimeters, multiply the number of Roman feet by 29.6. This factor is exact. To go the other way, multiply centimeters by 0.03378378378 (rounded).

centimeters = Roman feet × 29.6

Example: 10 Roman feet = 296 centimeters.

Approximate value. Standards for the Roman foot varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Roman Foot (pes)

Ancient RomanHistorical unit (no longer in standard use)Approximate value

The basic Roman unit of length, about 29.6 cm (11.65 in). Surviving rulers vary by a few millimeters, so values differ slightly between sources.

Latin pes, the word for the human foot, named the basic length of Roman building, surveying and road making. The accepted modern value is about 296 mm, and the figure used here is 296 mm. Surviving evidence does not agree to the millimeter. In 1639 the English scholar John Greaves compared monuments and objects in Rome and got 295 mm from a statue of Cossutius, 296 mm from the tomb of Statilius, and 301 mm from a congius vessel of Vespasian. William Smith later gave about 295.9 mm.

The foot could be divided into 12 unciae, or inches, or into 16 digiti, or fingers, a split borrowed from the Greek pous. Larger units were built from it, including the cubit at one and a half feet, the pace at five feet and the mile at 5,000 feet. A longer provincial foot, the pes Drusianus, measured roughly 333 to 335 mm. The English foot, about 304.8 mm, is close to the Roman one but about 3 percent longer.

1 Roman foot = 0.296 meters (approximately).

Sources: Wikipedia: Pes (unit); Wikipedia: Ancient Roman units of measurement

Centimeter (cm)

Metric (SI)Current unit

One hundredth of a meter. Used for body measurements, clothing and everyday objects.

Scientists, rather than shopkeepers, gave the centimeter its place. In 1832 Carl Friedrich Gauss proposed a system of absolute units built on length, mass and time, choosing the millimeter, milligram and second. In 1873 a committee of the British Association for the Advancement of Science, whose members included James Clerk Maxwell and William Thomson (Lord Kelvin), recommended the centimeter, gram and second instead. That CGS system dominated physics for decades, until the metre-kilogram-second system replaced it in the mid-twentieth century and led to SI.

CGS units proved awkward for rooms and buildings, which run to hundreds of centimeters, but the centimeter itself never went away. It is still the everyday unit for height, clothing and small objects, and it appears in map scales and rainfall reports. An adult fingernail is roughly one centimeter wide, and a milliliter is defined as exactly one cubic centimeter. An inch is exactly 2.54 centimeters. The CGS system itself survives mainly in theoretical physics and astrophysics, where Gaussian units are still common.

1 centimeter = 0.01 meters (exactly).

Sources: Wikipedia: Centimetre-gram-second system of units; Wikipedia: Centimetre; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.