Meters to Roman Cubits (m to cubitum)

1 meter equals 2.252252252 Roman cubits (rounded).

1 meter = 2.252252252 Roman cubits

How to convert meters to Roman cubits

To convert meters to Roman cubits, multiply the number of meters by 2.252252252. The factor is rounded to 10 significant digits. To go the other way, multiply Roman cubits by 0.444.

Roman cubits = meters × 2.252252252

Example: 10 meters = 22.52252252 Roman cubits.

Approximate value. Standards for the Roman cubit varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Roman Cubit (cubitum)

Ancient RomanHistorical unit (no longer in standard use)Approximate value

One and a half Roman feet, about 44.4 cm.

Cubitum was the Latin word for elbow, and it came from a verb meaning to lie down or recline, the root of the English cubit. Roman writers such as Vitruvius defined it as one and a half Roman feet, or six palm widths, which gives about 444 mm. That is the figure used here. It was meant to span roughly the length of the forearm from the elbow to the fingertips.

Compared with other ancient cubits it was short. The Egyptian royal cubit survives on rods measuring about 523 to 529 mm, and Wikipedia says ancient cubits generally ranged from about 44.4 to 52.9 cm, so the Roman one sits at the bottom of that range. Romans also used a separate, longer ulna of about 120 cm. In a modern setting the Roman cubit is a little over 17 inches.

1 Roman cubit = 0.444 meters (approximately).

Sources: Wikipedia: Cubit; Wikipedia: Ancient Roman units of measurement

Related conversions

See all length units.