Feet to Roman Cubits (ft to cubitum)

1 foot equals 0.6864864865 Roman cubits (rounded).

1 foot = 0.6864864865 Roman cubits

How to convert feet to Roman cubits

To convert feet to Roman cubits, multiply the number of feet by 0.6864864865. The factor is rounded to 10 significant digits. To go the other way, multiply Roman cubits by 1.456692913 (rounded).

Roman cubits = feet × 0.6864864865

Example: 10 feet = 6.864864865 Roman cubits.

Approximate value. Standards for the Roman cubit varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Foot (ft)

US & ImperialCurrent unit

12 inches. Defined as exactly 0.3048 meters. Still the standard unit for height, altitude in aviation and room dimensions in the US and UK.

Human anatomy supplied the idea: an adult foot is roughly 15 percent of body height. Ancient cultures turned that into standards, but not the same one. The Greek pous was about 302 mm, the standard Roman pes about 295.7 mm, and a Harappan foot of about 335 mm has been reported from the Indus Valley. Historically, a foot fell somewhere between about 250 and 335 mm. Charlemagne tried to standardize units around 790 with little lasting success, and in 1593 English law fixed the statute mile at 5,280 feet.

The modern foot dates from the 1959 International Yard and Pound Agreement, which defined the yard as exactly 0.9144 meter and so the foot as exactly 0.3048 meter; the UK adopted it on 1 January 1964. The US survey foot, defined in 1893 as 1200/3937 meter, was deprecated on 31 December 2022. Feet remain in everyday use for height and rooms in the US, and ISO shipping containers are defined in them. Aviation altitudes use them too: flight level 330 means 33,000 feet.

1 foot = 0.3048 meters (exactly).

Sources: Wikipedia: Foot (unit); Wikipedia: Mile; NIST Guide to the SI, Appendix B.8: conversion factors

Roman Cubit (cubitum)

Ancient RomanHistorical unit (no longer in standard use)Approximate value

One and a half Roman feet, about 44.4 cm.

Cubitum was the Latin word for elbow, and it came from a verb meaning to lie down or recline, the root of the English cubit. Roman writers such as Vitruvius defined it as one and a half Roman feet, or six palm widths, which gives about 444 mm. That is the figure used here. It was meant to span roughly the length of the forearm from the elbow to the fingertips.

Compared with other ancient cubits it was short. The Egyptian royal cubit survives on rods measuring about 523 to 529 mm, and Wikipedia says ancient cubits generally ranged from about 44.4 to 52.9 cm, so the Roman one sits at the bottom of that range. Romans also used a separate, longer ulna of about 120 cm. In a modern setting the Roman cubit is a little over 17 inches.

1 Roman cubit = 0.444 meters (approximately).

Sources: Wikipedia: Cubit; Wikipedia: Ancient Roman units of measurement

Related conversions

See all length units.