Chō to Meters (chō to m)

1 chō equals 109.0909091 meters (rounded).

1 chō = 109.0909091 meters

How to convert chō to meters

To convert chō to meters, multiply the number of chō by 109.0909091. The factor is rounded to 10 significant digits. To go the other way, multiply meters by 0.009166666667 (rounded).

meters = chō × 109.0909091

Example: 10 chō = 1,090.909091 meters.

About these units

Chō (chō)

JapaneseTraditional unit (still used in some regions)

60 ken, about 109.09 m. A traditional measure of distance along roads and the length of a block.

Cho is written with a character that also means town or block, and the unit appears under the same name for area, which Japanese Wikipedia notes alongside the length meaning. As a length it equals 60 ken, or 360 shaku, putting it between the ken and the ri.

Under the 1891 law it is exactly 1200/11 meter, about 109.09 meters or 358 feet. Because the ken was longer in the 16th century than after the Tokugawa reduction around 1650, a cho measured in an older document may have been several percent longer, so such figures should be treated as approximate.

Thirty-six cho make one ri, so the cho worked as a convenient step for road distances and field layouts. Today it is a historical and place-name unit: the modern metric replacement is simply about 109 meters, roughly one city block.

1 chō = 109.0909091 meters (approximately).

Sources: Wikipedia: Japanese units of measurement; Japanese Wikipedia: Shakkanho (尺貫法); Wikipedia: Ken (unit)

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Related conversions

See all length units.