Square Millimeters to Acres (mm² to ac)

1 square millimeter equals 2.471053815×10⁻¹⁰ acres (rounded).

1 square millimeter = 2.471053815×10⁻¹⁰ acres

How to convert square millimeters to acres

To convert square millimeters to acres, multiply the number of square millimeters by 2.471053815×10⁻¹⁰. The factor is rounded to 10 significant digits. To go the other way, multiply acres by 4,046,856,422 (rounded).

acres = square millimeters × 2.471053815×10⁻¹⁰

Example: 10 square millimeters = 2.471053815×10⁻⁹ acres.

About these units

Square Millimeter (mm²)

Metric (SI)Current unit

A square one millimeter on a side. Used for the cross-section of wires and small parts.

Gauss gets the credit for putting the millimeter at the base of a scientific measuring system. His 1832 proposal for absolute units used the millimeter, milligram and second, although the centimeter-based CGS system later won out among scientists. The square millimeter is a one-thousandth-by-one-thousandth square of a meter, so it takes a million of them to make a square meter, and it has no famous inventor of its own.

Electricians know it best. Wire and cable sizes are given as the cross-sectional area of the copper conductor, and the standard sizes listed for UK domestic wiring are 1, 1.5, 2.5, 4, 6 and 10 mm². Twin and earth cable of 2.5 mm² typically serves sockets on a 16 A radial or 32 A ring circuit, 1 mm² serves lighting on a 6 A breaker, and 4 mm² feeds a cooker or shower. Conductor size depends on current capacity and allowed voltage drop, not on voltage alone. One square inch is exactly 645.16 mm², so small parts in either system compare easily.

1 square millimeter = 0.000001 square meters (exactly).

Sources: Wikipedia: Electrical wiring in the United Kingdom; Wikipedia: Centimetre-gram-second system of units; Wikipedia: Square metre

Acre (ac)

US & ImperialCurrent unit

43,560 square feet or exactly 4,046.8564224 m², about 40% of a hectare. Originally the area a yoke of oxen could plow in a day.

Ploughland gave the acre its name: it traces to Old Norse akr, meaning cultivated land, and is related to German Acker and Latin ager. In medieval England it was a farming measure, the land one man with a team of eight oxen could plough in a day. The traditional strip was 40 perches long and 4 perches wide, which is 660 by 66 feet, or ten square chains. The shape was never the point, and the article on the unit stresses that any area of 43,560 square feet is an acre.

An acre is 43,560 square feet, 4,840 square yards or 1/640 of a square mile, close to 0.4 hectare. For Americans, it is roughly 88 by 55 yards, about 90 percent of a football field without the end zones. The Weights and Measures Act 1878 fixed it at 4,840 square yards in Britain, where trade use ended in 1995. The 1959 international acre is exactly 4,046.8564224 m²; the US survey acre, about 4,046.872 m², differed slightly, and US survey units were retired after 2022.

1 acre = 4,046.856422 square meters (approximately).

Sources: Wikipedia: Acre; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all area units.