Guntha to Square Feet (guntha to ft²)

1 guntha equals 1,089 square feet exactly.

1 guntha = 1,089 square feet

How to convert guntha to square feet

To convert guntha to square feet, multiply the number of guntha by 1,089. This factor is exact. To go the other way, multiply square feet by 0.0009182736455 (rounded).

square feet = guntha × 1,089

Example: 10 guntha = 10,890 square feet.

About these units

Guntha (guntha)

Indian subcontinentTraditional unit (still used in some regions)

1,089 square feet (about 101.17 m²). A land unit used in Maharashtra, Gujarat and Karnataka; 40 guntha make an acre.

A guntha is a small land measure used on the Indian subcontinent, and in India it is defined as a square 33 feet on a side. That gives 1,089 square feet, or about 101.17 square metres (120.999 square yards), and 40 gunthas make one acre. The guntha therefore acts as the fraction below the acre in plot sizes.

The size changes across the border. In Pakistan the unit is counted as 120 square yards, with 4 guntha to a jareeb and 10 jareeb to an acre, so the 40-to-an-acre ratio survives even though the guntha itself is a little smaller. Sub-units differ as well. In India a guntha holds 16 annas of about 6.32 square metres each, while in Pakistan 6 annas of 20.16 square yards make a guntha.

Wikipedia cites a 1966 United Nations handbook for the Pakistani values and says the units were used alongside the Imperial measures. The figure used here is the Indian one, 1,089 square feet. In metric terms a guntha is a little over 100 square metres.

1 guntha = 101.1714106 square meters (approximately).

Sources: Wikipedia: Gunta

Square Foot (ft²)

US & ImperialCurrent unit

Exactly 0.09290304 m². The standard unit for floor areas and real estate in the US, UK and India.

Feet came first, and they were not all the same length. As a body-based unit, the foot ranged historically between about 250 and 335 millimeters, with ancient Greek and Roman feet near 300 mm. In medieval England a statute foot was set at 10/11 of an older Belgic foot, and Charlemagne's attempt around 790 to standardize units largely failed. The square foot is simply that length squared, so its size changed along with the foot.

The 1959 international agreement fixed the foot at exactly 0.3048 meter, so one square foot is exactly 0.09290304 m², or 144 square inches. The United Kingdom adopted the new foot in 1964. Today the square foot is the usual way of listing property in the United States, Canada, the United Kingdom, India, Pakistan, Singapore and Hong Kong, although the measuring convention varies: agents may measure corner to corner, subtract unheated space, or add heated space that extends beyond the end-to-end measurement. The world's smallest park has been reported at 2.6 sq ft.

1 square foot = 0.09290304 square meters (exactly).

Sources: Wikipedia: Square foot; Wikipedia: Foot (unit); NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all area units.