Metric Tablespoons to Cubic Meters (tbsp to m³)

1 metric tablespoon equals 0.000015 cubic meters exactly.

1 metric tablespoon = 0.000015 cubic meters

How to convert metric tablespoons to cubic meters

To convert metric tablespoons to cubic meters, multiply the number of metric tablespoons by 0.000015. This factor is exact. To go the other way, multiply cubic meters by 66,666.66667 (rounded).

cubic meters = metric tablespoons × 0.000015

Example: 10 metric tablespoons = 0.00015 cubic meters.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Metric Tablespoon (tbsp)

Cooking & barCurrent unit

Exactly 15 mL, used in most countries.

Fifteen milliliters is the working size of the tablespoon in most of the world, and it is a rounded figure. Older customary values were about 14.8 mL for the US and about 14.2 mL for the UK, and modern UK and US measuring spoons are both treated as 15 mL in most contexts. The tablespoon itself dates to the early 1700s, when it first appeared in place settings for soup.

The 15 mL spoon is a staple in recipes everywhere. Three metric teaspoons make a tablespoon, and 16 and two thirds make a 250 mL metric cup. Australia is the notable exception, using a 20 milliliter tablespoon and counting four teaspoons to it, so a recipe from one country can taste off in another. Check which spoon a cook has in mind: scoops of oil, honey or baking powder amount to a third more in Australia.

1 metric tablespoon = 0.015 liters (exactly).

Sources: Wikipedia: Tablespoon; Wikipedia: Metric cup

Cubic Meter (m³)

Metric (SI)Current unit

The SI derived unit of volume: 1,000 liters. Used for water supply, gas, concrete and shipping space.

When the metric system was set up, the cube whose edge is one meter became its natural large unit of volume. A cubic meter also went by other names: kiloliter, now rarely used, and stere, still applied to stacked firewood. In modern SI it is the coherent derived unit of volume, and the liter is a convenience unit defined from it as one thousandth of a cubic meter.

A cubic meter is large by everyday standards. It holds 1,000 liters, and pure water at its densest weighs almost exactly one tonne in that space, which is how the metric tonne and the cubic meter ended up so conveniently paired. It is the unit of choice for water supply, gas, timber, concrete and shipping space, where freight is often quoted in CBM. For a picture, about 6.29 oil barrels or 264 US gallons fit in one, and an Olympic swimming pool, at least 2 meters deep, holds roughly 2,500 of them.

1 cubic meter = 1,000 liters (exactly).

Sources: Wikipedia: Cubic metre; Wikipedia: Olympic-size swimming pool; NIST Guide to the SI, Chapter 5: units outside the SI

Related conversions

See all volume units.