Liters to Cubic Yards (L to yd³)

1 liter equals 0.001307950619 cubic yards (rounded).

1 liter = 0.001307950619 cubic yards

How to convert liters to cubic yards

To convert liters to cubic yards, multiply the number of liters by 0.001307950619. The factor is rounded to 10 significant digits. To go the other way, multiply cubic yards by 764.554858 (rounded).

cubic yards = liters × 0.001307950619

Example: 10 liters = 0.01307950619 cubic yards.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Liter (L)

Metric (SI)Current unit

One cubic decimeter (1,000 cm³). The everyday metric unit of volume for drinks, fuel and cooking.

The liter was born in revolutionary France. In 1795 it was introduced as a republican unit and defined as one cubic decimeter, while the gram was tied to a cubic centimeter of water. The name comes from the older French litron, itself descended from a Byzantine Greek unit of weight, not volume. A small revision of the decimeter in 1798 left the first liter about 1.000974 of today's cubic decimeter, and in 1879 the international metric authorities adopted the liter with the symbol l.

The liter then took a strange detour. In 1901 it was redefined as the space taken up by one kilogram of pure water at its densest, which made it about 1.000028 cubic decimeters, and that muddled definition lasted until 1964, when it was restored to exactly one cubic decimeter. A capital L was added as an alternative symbol in 1979 because a lowercase l is easy to mistake for the digit 1, and NIST says L is the symbol to use in the United States. A liter of water is close to a kilogram, which is why a one-liter bottle feels like a kilo in the hand.

The liter is the reference unit for volume on this site.

Sources: Wikipedia: Litre; NIST Guide to the SI, Chapter 5: units outside the SI

Cubic Yard (yd³)

US & ImperialCurrent unit

27 cubic feet or 764.555 liters. Used for soil, gravel and concrete in the US.

Cubic yard is a cube three feet on each side, which makes it exactly 27 cubic feet or 46,656 cubic inches. In metric terms it is about 0.7646 cubic meters, or 764.55 liters. The unit follows the yard in the United States and Canada, and British railways once rated ballast wagons by it, with one Great Western Railway wagon holding 8 cubic yards.

A cubic yard is easier to picture than the number suggests. It holds about 202 US gallons, or nearly five oil barrels. That is a scale where bulk materials such as soil, gravel, mulch and concrete are naturally counted, so a patio slab or garden bed needs a handful of them. A handy rule of thumb follows from the arithmetic: one cubic yard spread one inch deep covers 324 square feet.

1 cubic yard = 764.554858 liters (approximately).

Sources: Wikipedia: Cubic yard; NIST SP 811, Appendix B.8: conversion factors for volume

Related conversions

See all volume units.