Imperial Gallons to US Pints (gal (UK) to pt)

1 imperial gallon equals 9.607599404 US pints (rounded).

1 imperial gallon = 9.607599404 US pints

How to convert imperial gallons to US pints

To convert imperial gallons to US pints, multiply the number of imperial gallons by 9.607599404. The factor is rounded to 10 significant digits. To go the other way, multiply US pints by 0.1040842731 (rounded).

US pints = imperial gallons × 9.607599404

Example: 10 imperial gallons = 96.07599404 US pints.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Imperial Gallon (gal (UK))

Imperial (British)Current unit

Exactly 4.54609 liters, the volume of 10 pounds of water. Used for fuel economy in the UK (miles per gallon) and historically across the Commonwealth.

Britain unified its confusing gallons by act of Parliament in 1824. Before then, the country used separate ones for wine at 231 cubic inches, ale at 282 and corn at about 268.8. The 1824 reform replaced them with the imperial gallon, defined as the volume of ten pounds of distilled water, calculated at 277.274 cubic inches. A new definition in 1889 slightly changed that, and after the liter was restored to exactly a cubic decimeter in 1964, Canada and then the UK in 1976 adopted the exact value of 4.54609 liters.

Because the United States kept the 231-cubic-inch wine gallon, an imperial gallon is about 20 percent larger than a US gallon. That explains why a car rated at 40 miles per gallon in Britain is less impressive in American terms, since it comes to roughly 33 US miles per gallon. Ireland dropped the gallon as a primary trade unit at the end of 1993 and the UK at the end of September 1995, but it lives on in British fuel-economy figures and older recipes.

1 imperial gallon = 4.54609 liters (exactly).

Sources: Wikipedia: Gallon; UK Weights and Measures Act 1985, Schedule 1

US Pint (pt)

US customaryCurrent unit

One eighth of a US gallon, 473.176 mL (16 US fluid ounces). The US pint is about 17% smaller than the imperial pint.

Pint seems to come from Old French pinte, possibly from a Latin word meaning painted, perhaps because capacity marks were painted on containers. British North America inherited the 231-cubic-inch wine gallon around 1707, and the US liquid pint was derived from it as one eighth. After Britain adopted the imperial gallon in 1824, American and British pints parted ways for good.

Today the US liquid pint is exactly 28.875 cubic inches, or 473.176473 milliliters. The imperial pint, at 568.26125 mL, is about 20 percent larger. That is why a pint of beer in an American bar is a lesser drink than a pint in an English pub, and why recipes from different countries cannot swap pints blindly. In the US a pint is a common size for ice cream, cream and craft beer, and a separate US dry pint of about 550.6 milliliters measures blueberries and cherry tomatoes.

1 US pint = 0.473176473 liters (exactly).

Sources: Wikipedia: Pint; NIST SP 811, Appendix B.8: conversion factors for volume

Related conversions

See all volume units.