Imperial Gallons to Metric Tablespoons (gal (UK) to tbsp)

1 imperial gallon equals 303.0726667 metric tablespoons (rounded).

1 imperial gallon = 303.0726667 metric tablespoons

How to convert imperial gallons to metric tablespoons

To convert imperial gallons to metric tablespoons, multiply the number of imperial gallons by 303.0726667. The factor is rounded to 10 significant digits. To go the other way, multiply metric tablespoons by 0.003299538724 (rounded).

metric tablespoons = imperial gallons × 303.0726667

Example: 10 imperial gallons = 3,030.726667 metric tablespoons.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Imperial Gallon (gal (UK))

Imperial (British)Current unit

Exactly 4.54609 liters, the volume of 10 pounds of water. Used for fuel economy in the UK (miles per gallon) and historically across the Commonwealth.

Britain unified its confusing gallons by act of Parliament in 1824. Before then, the country used separate ones for wine at 231 cubic inches, ale at 282 and corn at about 268.8. The 1824 reform replaced them with the imperial gallon, defined as the volume of ten pounds of distilled water, calculated at 277.274 cubic inches. A new definition in 1889 slightly changed that, and after the liter was restored to exactly a cubic decimeter in 1964, Canada and then the UK in 1976 adopted the exact value of 4.54609 liters.

Because the United States kept the 231-cubic-inch wine gallon, an imperial gallon is about 20 percent larger than a US gallon. That explains why a car rated at 40 miles per gallon in Britain is less impressive in American terms, since it comes to roughly 33 US miles per gallon. Ireland dropped the gallon as a primary trade unit at the end of 1993 and the UK at the end of September 1995, but it lives on in British fuel-economy figures and older recipes.

1 imperial gallon = 4.54609 liters (exactly).

Sources: Wikipedia: Gallon; UK Weights and Measures Act 1985, Schedule 1

Metric Tablespoon (tbsp)

Cooking & barCurrent unit

Exactly 15 mL, used in most countries.

Fifteen milliliters is the working size of the tablespoon in most of the world, and it is a rounded figure. Older customary values were about 14.8 mL for the US and about 14.2 mL for the UK, and modern UK and US measuring spoons are both treated as 15 mL in most contexts. The tablespoon itself dates to the early 1700s, when it first appeared in place settings for soup.

The 15 mL spoon is a staple in recipes everywhere. Three metric teaspoons make a tablespoon, and 16 and two thirds make a 250 mL metric cup. Australia is the notable exception, using a 20 milliliter tablespoon and counting four teaspoons to it, so a recipe from one country can taste off in another. Check which spoon a cook has in mind: scoops of oil, honey or baking powder amount to a third more in Australia.

1 metric tablespoon = 0.015 liters (exactly).

Sources: Wikipedia: Tablespoon; Wikipedia: Metric cup

Related conversions

See all volume units.