Cubic Feet to Metric Teaspoons (ft³ to tsp)

1 cubic foot equals 5,663.369318 metric teaspoons (rounded).

1 cubic foot = 5,663.369318 metric teaspoons

How to convert cubic feet to metric teaspoons

To convert cubic feet to metric teaspoons, multiply the number of cubic feet by 5,663.369318. The factor is rounded to 10 significant digits. To go the other way, multiply metric teaspoons by 0.0001765733336 (rounded).

metric teaspoons = cubic feet × 5,663.369318

Example: 10 cubic feet = 56,633.69318 metric teaspoons.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Foot (ft³)

US & ImperialCurrent unit

Exactly 28.316846592 liters (1,728 cubic inches). Used for refrigerator capacity, gas volume and shipping.

Cubic foot grew from the foot itself, a length unit with ancient origins, cubed into a volume of 1,728 cubic inches. Since the international foot was fixed at exactly 0.3048 meters, it equals exactly 28.316846592 liters. It sits at the center of the Anglo-American cubic system, a cube you could build from twelve-inch rulers, and it is about 7.48 US gallons or 6.23 imperial gallons.

In practice the cubic foot is the language of capacity and flow. Natural gas and household water are often billed per hundred cubic feet, written CCF, while gas reserves are reported in thousands and trillions of cubic feet. Rivers are measured in cubic feet per second, called cusecs, and fans and air compressors are rated in cubic feet per minute. To picture one, imagine a box a foot on each side holding a bit under seven and a half gallon jugs of water.

1 cubic foot = 28.31684659 liters (approximately).

Sources: Wikipedia: Cubic foot; NIST SP 811, Appendix B.8: conversion factors for volume

Metric Teaspoon (tsp)

Cooking & barCurrent unit

Exactly 5 mL, used in most countries.

Five milliliters is the metric teaspoon, a figure so tidy that it has become the working definition for medicine and food labels. The traditional British teaspoon was an imperial fluid drachm, one eighth of an imperial fluid ounce, about 3.55 milliliters, and the American one was 4.93 mL. US nutrition labeling law now defines a teaspoon as exactly 5 milliliters.

The 5 mL teaspoon matters most when dosing medicine. Kitchen spoons vary widely, with one Greek survey of 71 household teaspoons finding volumes from 2.5 to 7.3 mL, so measuring spoons, syringes and calibrated cups are the safer tools. It also anchors the metric cooking system: three teaspoons make a 15 mL tablespoon, and fifty fit in a 250 mL metric cup. Australia keeps a 5 mL teaspoon but counts four of them in its larger 20 mL tablespoon.

1 metric teaspoon = 0.005 liters (exactly).

Sources: Wikipedia: Teaspoon; 21 CFR 101.9: nutrition labeling household measures; Wikipedia: Metric cup

Related conversions

See all volume units.