Cubic Feet to Imperial Pints (ft³ to pt (UK))

1 cubic foot equals 49.83068367 imperial pints (rounded).

1 cubic foot = 49.83068367 imperial pints

How to convert cubic feet to imperial pints

To convert cubic feet to imperial pints, multiply the number of cubic feet by 49.83068367. The factor is rounded to 10 significant digits. To go the other way, multiply imperial pints by 0.02006795665 (rounded).

imperial pints = cubic feet × 49.83068367

Example: 10 cubic feet = 498.3068367 imperial pints.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Foot (ft³)

US & ImperialCurrent unit

Exactly 28.316846592 liters (1,728 cubic inches). Used for refrigerator capacity, gas volume and shipping.

Cubic foot grew from the foot itself, a length unit with ancient origins, cubed into a volume of 1,728 cubic inches. Since the international foot was fixed at exactly 0.3048 meters, it equals exactly 28.316846592 liters. It sits at the center of the Anglo-American cubic system, a cube you could build from twelve-inch rulers, and it is about 7.48 US gallons or 6.23 imperial gallons.

In practice the cubic foot is the language of capacity and flow. Natural gas and household water are often billed per hundred cubic feet, written CCF, while gas reserves are reported in thousands and trillions of cubic feet. Rivers are measured in cubic feet per second, called cusecs, and fans and air compressors are rated in cubic feet per minute. To picture one, imagine a box a foot on each side holding a bit under seven and a half gallon jugs of water.

1 cubic foot = 28.31684659 liters (approximately).

Sources: Wikipedia: Cubic foot; NIST SP 811, Appendix B.8: conversion factors for volume

Imperial Pint (pt (UK))

Imperial (British)Current unit

Exactly 568.26125 mL (20 imperial fluid ounces). The pint of beer and milk in the UK and Ireland.

The imperial pint derives from Parliament's 1824 decision to replace Britain's assorted gallons with one defined by ten pounds of water at 62 degrees Fahrenheit. A pint is one eighth of that gallon and holds 20 imperial fluid ounces, or exactly 568.26125 milliliters. The word reached English from French pinte, which in modern French now means half a liter, while Canadian French uses it for the imperial quart.

That pint is about 20 percent larger than the US liquid pint of 473 mL, so a pint in Dublin or London buys noticeably more beer than one in Chicago. When Britain metricated, the pint was kept for draught beer and cider and for milk in returnable bottles, and draught beer has to be served in measured, stamped glasses. Culturally the pint is more than a measure: it is shorthand for a night at the pub.

1 imperial pint = 0.56826125 liters (exactly).

Sources: Wikipedia: Pint; UK Weights and Measures Act 1985, Schedule 1

Related conversions

See all volume units.