Cubic Feet to Imperial Fluid Ounces (ft³ to fl oz (UK))

1 cubic foot equals 996.6136734 imperial fluid ounces (rounded).

1 cubic foot = 996.6136734 imperial fluid ounces

How to convert cubic feet to imperial fluid ounces

To convert cubic feet to imperial fluid ounces, multiply the number of cubic feet by 996.6136734. The factor is rounded to 10 significant digits. To go the other way, multiply imperial fluid ounces by 0.001003397833 (rounded).

imperial fluid ounces = cubic feet × 996.6136734

Example: 10 cubic feet = 9,966.136734 imperial fluid ounces.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Foot (ft³)

US & ImperialCurrent unit

Exactly 28.316846592 liters (1,728 cubic inches). Used for refrigerator capacity, gas volume and shipping.

Cubic foot grew from the foot itself, a length unit with ancient origins, cubed into a volume of 1,728 cubic inches. Since the international foot was fixed at exactly 0.3048 meters, it equals exactly 28.316846592 liters. It sits at the center of the Anglo-American cubic system, a cube you could build from twelve-inch rulers, and it is about 7.48 US gallons or 6.23 imperial gallons.

In practice the cubic foot is the language of capacity and flow. Natural gas and household water are often billed per hundred cubic feet, written CCF, while gas reserves are reported in thousands and trillions of cubic feet. Rivers are measured in cubic feet per second, called cusecs, and fans and air compressors are rated in cubic feet per minute. To picture one, imagine a box a foot on each side holding a bit under seven and a half gallon jugs of water.

1 cubic foot = 28.31684659 liters (approximately).

Sources: Wikipedia: Cubic foot; NIST SP 811, Appendix B.8: conversion factors for volume

Imperial Fluid Ounce (fl oz (UK))

Imperial (British)Current unit

Exactly 28.4130625 mL. About 4% smaller than the US fluid ounce.

Imperial fluid ounce comes from the 1824 reform that defined the British gallon as the volume of ten pounds of water. Because a gallon was set at 160 fluid ounces, an ounce of water weighs about one ounce of mass, around 28.35 grams. That neat link between volume and weight was the point of the imperial scheme, and it explains why people long thought of fluid ounces and weight ounces as nearly the same.

Today an imperial fluid ounce is exactly 28.4130625 milliliters, one twentieth of an imperial pint. That is about 4 percent smaller than the US fluid ounce at 29.57 mL, so a US recipe using fluid ounces does not map one-for-one onto a British one. UK trade rules restricted its use in 1995, and it lives on mostly on older labels, in bars and in recipes. Twenty of them fill an imperial pint, which makes the pint the easiest way to picture one.

1 imperial fluid ounce = 0.0284130625 liters (exactly).

Sources: Wikipedia: Fluid ounce; UK Weights and Measures Act 1985, Schedule 1

Related conversions

See all volume units.