Cubic Centimeters to Cubic Feet (cm³ to ft³)

1 cubic centimeter equals 0.00003531466672 cubic feet (rounded).

1 cubic centimeter = 0.00003531466672 cubic feet

How to convert cubic centimeters to cubic feet

To convert cubic centimeters to cubic feet, multiply the number of cubic centimeters by 0.00003531466672. The factor is rounded to 10 significant digits. To go the other way, multiply cubic feet by 28,316.84659 (rounded).

cubic feet = cubic centimeters × 0.00003531466672

Example: 10 cubic centimeters = 0.0003531466672 cubic feet.

Pints, quarts, gallons and fluid ounces differ between the US and the UK. Units are labeled 'US' or 'imperial' to avoid confusion.

About these units

Cubic Centimeter (cm³)

Metric (SI)Current unit

Exactly one milliliter. Used for engine displacement (as 'cc') and in medicine.

Cubic centimeter is the volume of a cube one centimeter on each side, and it belonged to the old centimeter-gram-second system of units, in which one cubic centimeter of water was meant to weigh about one gram. Its famous abbreviation, cc, is not an SI symbol at all. The official symbol is cm³, yet cc stuck in medicine, cooking and engineering because it is quick to write and say.

A cubic centimeter equals exactly one milliliter, so the two names are interchangeable and which one you meet depends on the field. Doses are often written in cc. Motorcyclists, scooter makers and engine builders use it for displacement: the swept volume is the bore area times the stroke times the number of cylinders, so a 1,000 cc sport bike can move eight times as much air per cycle as a 125 cc scooter. One cubic inch is 16.38706 cubic centimeters, which lets Americans and Europeans compare engines.

1 cubic centimeter = 0.001 liters (exactly).

Sources: Wikipedia: Cubic centimetre; Wikipedia: Litre

Cubic Foot (ft³)

US & ImperialCurrent unit

Exactly 28.316846592 liters (1,728 cubic inches). Used for refrigerator capacity, gas volume and shipping.

Cubic foot grew from the foot itself, a length unit with ancient origins, cubed into a volume of 1,728 cubic inches. Since the international foot was fixed at exactly 0.3048 meters, it equals exactly 28.316846592 liters. It sits at the center of the Anglo-American cubic system, a cube you could build from twelve-inch rulers, and it is about 7.48 US gallons or 6.23 imperial gallons.

In practice the cubic foot is the language of capacity and flow. Natural gas and household water are often billed per hundred cubic feet, written CCF, while gas reserves are reported in thousands and trillions of cubic feet. Rivers are measured in cubic feet per second, called cusecs, and fans and air compressors are rated in cubic feet per minute. To picture one, imagine a box a foot on each side holding a bit under seven and a half gallon jugs of water.

1 cubic foot = 28.31684659 liters (approximately).

Sources: Wikipedia: Cubic foot; NIST SP 811, Appendix B.8: conversion factors for volume

Related conversions

See all volume units.