Minutes to Nanoseconds (min to ns)

1 minute equals 60,000,000,000 nanoseconds exactly.

1 minute = 60,000,000,000 nanoseconds

How to convert minutes to nanoseconds

To convert minutes to nanoseconds, multiply the number of minutes by 60,000,000,000. This factor is exact. To go the other way, multiply nanoseconds by 1.666666667×10⁻¹¹ (rounded).

nanoseconds = minutes × 60,000,000,000

Example: 10 minutes = 600,000,000,000 nanoseconds.

Months and years are not constant. This site uses the average Gregorian year of 365.2425 days, so one 'year' converts to 365.2425 days, not 365; use 'common year' for exactly 365 days.

About these units

Minute (min)

Metric (SI)Current unit

60 seconds. Defined as one sixtieth of an hour.

Minute means small, not short. It comes from the Latin pars minuta prima, the first small part, produced when sixty-based division was applied to the hour. Al-Biruni is credited with dividing the hour into minutes, seconds, thirds and fourths around the year 1000, and Roger Bacon used the same scheme in 1267. For everyday life the minute needed hardware: Jost Bürgi is said to have made the first clock with a minute hand, for Tycho Brahe in 1577, and watches got minute hands only after Thomas Tompion's hairspring of 1675 made them accurate enough.

A minute is 60 seconds, exactly 1/60 of an hour, and the BIPM's SI Brochure is the reference for its symbol, min. Civil timekeeping can bend the rule: because of leap seconds, a UTC minute occasionally holds 61 seconds. A negative leap second would produce a 59-second minute, but that has never happened in more than 40 years. People use the minute for cooking, lectures and phone calls, and the same name serves for the arcminute, which is a sixtieth of a degree.

1 minute = 60 seconds (exactly).

Sources: Wikipedia: Minute; BIPM: SI Brochure, 9th edition; NIST: the second and the SI redefinition

Nanosecond (ns)

Metric (SI)Current unit

One billionth of a second. Light travels about 30 cm in a nanosecond.

Few units are as easy to picture as the nanosecond, because light makes it concrete. In a vacuum, light needs about 3.34 nanoseconds to travel one metre and about 1.02 nanoseconds to travel one foot. That is why engineers talk about wire lengths and signal delays in the same breath once clocks reach the gigahertz range, where the cycle time of a 1 GHz signal is exactly one nanosecond.

A nanosecond is one billionth of a second, and the ratio is hard to grasp: one nanosecond is to one second as one second is to about 31.7 years. It is the natural unit of fast digital hardware. A 74HC-series logic chip common in the mid-1980s had a typical propagation delay of about 8 ns, and the gap between packets on Gigabit Ethernet is 96 ns. The Go language's time package offers 1 ns precision.

1 nanosecond = 1×10⁻⁹ seconds (exactly).

Sources: Wikipedia: Nanosecond; BIPM: SI Brochure, 9th edition

Related conversions

See all time units.