Minutes to Milliseconds (min to ms)

1 minute equals 60,000 milliseconds exactly.

1 minute = 60,000 milliseconds

How to convert minutes to milliseconds

To convert minutes to milliseconds, multiply the number of minutes by 60,000. This factor is exact. To go the other way, multiply milliseconds by 0.00001666666667 (rounded).

milliseconds = minutes × 60,000

Example: 10 minutes = 600,000 milliseconds.

Months and years are not constant. This site uses the average Gregorian year of 365.2425 days, so one 'year' converts to 365.2425 days, not 365; use 'common year' for exactly 365 days.

About these units

Minute (min)

Metric (SI)Current unit

60 seconds. Defined as one sixtieth of an hour.

Minute means small, not short. It comes from the Latin pars minuta prima, the first small part, produced when sixty-based division was applied to the hour. Al-Biruni is credited with dividing the hour into minutes, seconds, thirds and fourths around the year 1000, and Roger Bacon used the same scheme in 1267. For everyday life the minute needed hardware: Jost Bürgi is said to have made the first clock with a minute hand, for Tycho Brahe in 1577, and watches got minute hands only after Thomas Tompion's hairspring of 1675 made them accurate enough.

A minute is 60 seconds, exactly 1/60 of an hour, and the BIPM's SI Brochure is the reference for its symbol, min. Civil timekeeping can bend the rule: because of leap seconds, a UTC minute occasionally holds 61 seconds. A negative leap second would produce a 59-second minute, but that has never happened in more than 40 years. People use the minute for cooking, lectures and phone calls, and the same name serves for the arcminute, which is a sixtieth of a degree.

1 minute = 60 seconds (exactly).

Sources: Wikipedia: Minute; BIPM: SI Brochure, 9th edition; NIST: the second and the SI redefinition

Millisecond (ms)

Metric (SI)Current unit

One thousandth of a second. Used for computer response times and sports timing.

Milliseconds sit on the border between what people perceive and what instruments must be built to catch. Nobody feels a single one: a human blink lasts roughly 100 to 400 of them, and the average resting heart cycle is about 860. The prefix milli- makes the unit exactly one thousandth of a second, so it is a handy yardstick for events a little too quick to notice but slow enough for a stopwatch-style instrument to capture.

A millisecond is one thousandth of a second, and the scale references are easy to picture. Light in a vacuum covers about 300 km in 1 ms, and sound in air covers about 34 cm. A film frame at 24 frames per second lasts about 41.7 ms, one cycle of 60 Hz mains power lasts about 16.7 ms, and a camera shutter set to 1/125 s is open for about 8 ms. Online gamers watch network latency in milliseconds, with typical broadband figures of 5 to 80 ms, and telephone engineers recommend keeping one-way delay under about 150 ms before conversation starts to feel awkward.

1 millisecond = 0.001 seconds (exactly).

Sources: Wikipedia: Millisecond; BIPM: SI Brochure, 9th edition

Related conversions

See all time units.