Millimeters Of Mercury to PSI (mmHg to psi)

1 millimeter of mercury equals 0.01933677746 pounds per square inch (rounded).

1 millimeter of mercury = 0.01933677746 pounds per square inch

How to convert millimeters of mercury to pounds per square inch

To convert millimeters of mercury to pounds per square inch, multiply the number of millimeters of mercury by 0.01933677746. The factor is rounded to 10 significant digits. To go the other way, multiply pounds per square inch by 51.7149252 (rounded).

pounds per square inch = millimeters of mercury × 0.01933677746

Example: 10 millimeters of mercury = 0.1933677746 pounds per square inch.

About these units

Millimeter Of Mercury (mmHg)

ScientificCurrent unit

About 133.322 pascals, the pressure from a 1 mm column of mercury. Blood pressure is still reported in mmHg.

Where the torr honors a person, the millimeter of mercury describes a gauge. It is a manometric unit: originally the pressure from a mercury column 1 mm tall, which means it depends on an assumed fluid density and on gravity. Mercury manometers were among the first accurate pressure gauges, and 17th-century experiments by Torricelli and then Pascal, whose mercury stood at about 23 inches on a mountaintop against about 26 at its base, showed that air has weight and that pressure drops with altitude.

To remove the ambiguity, mmHg is now fixed at exactly 133.322387415 Pa, using a conventional mercury density of 13,595.1 kg per cubic meter and standard gravity. The torr, defined as one 760th of a standard atmosphere, differs from it by only about 0.000015 percent.

Mercury is toxic and its readings vary with temperature and local gravity, so mercury gauges are now used less, and the unit's use is discouraged. Medicine nonetheless keeps it, especially for blood pressure, which is reported relative to atmospheric pressure, and hypertension guidelines in the US and Europe still use it.

1 millimeter of mercury = 133.3223874 pascals (approximately).

Sources: Wikipedia: Millimetre of mercury; Wikipedia: Torr; Wikipedia: Blaise Pascal

Pound Per Square Inch (psi)

US & ImperialCurrent unit

About 6,894.757 pascals. The common unit for tire pressure, hydraulics and gas pipelines in the US.

Unlike most pressure units, psi has no namesake: it simply spells out its own definition, one pound-force acting on one square inch, and it is based on avoirdupois units. Used mainly in the United States, it is about 6.895 kilopascals.

The letters after the unit matter. Psia is measured against a vacuum, while psig is measured against the surrounding air, so at sea level, where the atmosphere is about 14.7 psi, you add that amount to a gauge reading to get an absolute one. A bicycle tire at 65 psig is therefore at 79.7 psia, and the label psid means a difference between two pressures rather than a reference to ambient air.

Typical automobile tires are listed at about 32 psig, and road racing bicycle tires at about 120 psig. One standard atmosphere is 14.696 psi, which gives a feel for how many multiples of sea-level air those tire pressures represent.

1 pound per square inch = 6,894.757293 pascals (approximately).

Sources: Wikipedia: Pounds per square inch; Wikipedia: Standard atmosphere (unit)

Related conversions

See all pressure units.