Millimeters Of Mercury to Hectopascals (mmHg to hPa)

1 millimeter of mercury equals 1.333223874 hectopascals (rounded).

1 millimeter of mercury = 1.333223874 hectopascals

How to convert millimeters of mercury to hectopascals

To convert millimeters of mercury to hectopascals, multiply the number of millimeters of mercury by 1.333223874. The factor is rounded to 10 significant digits. To go the other way, multiply hectopascals by 0.7500615758 (rounded).

hectopascals = millimeters of mercury × 1.333223874

Example: 10 millimeters of mercury = 13.33223874 hectopascals.

About these units

Millimeter Of Mercury (mmHg)

ScientificCurrent unit

About 133.322 pascals, the pressure from a 1 mm column of mercury. Blood pressure is still reported in mmHg.

Where the torr honors a person, the millimeter of mercury describes a gauge. It is a manometric unit: originally the pressure from a mercury column 1 mm tall, which means it depends on an assumed fluid density and on gravity. Mercury manometers were among the first accurate pressure gauges, and 17th-century experiments by Torricelli and then Pascal, whose mercury stood at about 23 inches on a mountaintop against about 26 at its base, showed that air has weight and that pressure drops with altitude.

To remove the ambiguity, mmHg is now fixed at exactly 133.322387415 Pa, using a conventional mercury density of 13,595.1 kg per cubic meter and standard gravity. The torr, defined as one 760th of a standard atmosphere, differs from it by only about 0.000015 percent.

Mercury is toxic and its readings vary with temperature and local gravity, so mercury gauges are now used less, and the unit's use is discouraged. Medicine nonetheless keeps it, especially for blood pressure, which is reported relative to atmospheric pressure, and hypertension guidelines in the US and Europe still use it.

1 millimeter of mercury = 133.3223874 pascals (approximately).

Sources: Wikipedia: Millimetre of mercury; Wikipedia: Torr; Wikipedia: Blaise Pascal

Hectopascal (hPa)

Metric (SI)Current unit

100 pascals, equal to one millibar. The standard unit in weather forecasts and barometers.

Weather forecasters rarely think in pascals, and the hectopascal exists largely to avoid changing their numbers. When SI arrived, meteorologists generally switched from the millibar to the hectopascal, which equals exactly 100 Pa and exactly one millibar, so existing readings carried over unchanged. Observations are typically reported in hPa, following the World Meteorological Organization recommendation, though many scientific fields dislike the hecto prefix because they prefer steps of 1,000.

A typical sea-level reading is about 1,013 hPa. The lowest non-tornadic pressure ever measured was 870 hPa, in Typhoon Tip on 12 October 1979, and the highest sea-level pressure, 1,084.8 hPa, came at Tosontsengel, Mongolia, on 19 December 2001, at a station above 750 meters. At low altitudes, pressure drops about 12 hPa for every 100 meters you climb.

Aviation weather reports, such as the QNH in a METAR, use hectopascals or millibars in most countries, while the US, Canada and Japan quote altimeter settings in inches of mercury.

1 hectopascal = 100 pascals (exactly).

Sources: Wikipedia: Hectopascal; Wikipedia: Atmospheric pressure; Wikipedia: Pascal (unit)

Related conversions

See all pressure units.