Yards to Cable Lengths (yd to cb)

1 yard equals 0.004937365011 cable lengths (rounded).

1 yard = 0.004937365011 cable lengths

How to convert yards to cable lengths

To convert yards to cable lengths, multiply the number of yards by 0.004937365011. The factor is rounded to 10 significant digits. To go the other way, multiply cable lengths by 202.5371829 (rounded).

cable lengths = yards × 0.004937365011

Example: 10 yards = 0.04937365011 cable lengths.

About these units

Yard (yd)

US & ImperialCurrent unit

3 feet or 36 inches, exactly 0.9144 meters. Used for sports fields, fabric and short distances in the US and UK.

Yard descends from the Old English gerd or gyrd, meaning a branch, stave or measuring rod. It first appears in the late seventh-century laws of Ine of Wessex, though there it names a tax unit, the yardland. Around 959 to 963 King Edgar ordered that the measure held at Winchester be used throughout his realm, the earliest record of a prototype. A story that Henry I fixed the yard as the distance from his nose to his thumb is later folklore, and the true origin, whether pace, cubit or waist, remains speculative.

Britain defined the Imperial Standard Yard in 1824 as the distance between two marks on a brass rod at 62 degrees Fahrenheit. A fire in 1834 damaged the standard, a replacement was made in 1845, and the Weights and Measures Act 1855 recognized it. The 1959 international agreement then fixed the yard at exactly 0.9144 meter. Today it measures American and Canadian football fields, association football pitches and cricket pitches, appears on UK road signs for short distances, and is still used to sell fabric in the US and UK.

1 yard = 0.9144 meters (exactly).

Sources: Wikipedia: Yard; Wikipedia: Inch; NIST Guide to the SI, Appendix B.8: conversion factors

Cable Length (cb)

NauticalTraditional unit (still used in some regions)

One tenth of a nautical mile (185.2 m). A traditional nautical measure for short distances between ships.

Before it became a figure on a chart, a cable was simply the thick rope that held a ship at anchor. Ropemakers worked on long covered ropewalks, and the length of the walk limited the longest rope they could lay. By the mid-sixteenth century the usual anchor cable was about 100 fathoms, or 600 feet, so the word turned into a measure of distance. The ropewalk at Chatham Dockyard is a quarter of a mile long, built to turn out standard coils of 120 fathoms.

Mariners found a cable handy for judging short gaps, such as the space between two ships in formation or the distance to a hazard. Because a nautical mile of 6,080 feet divides neatly by ten, the Admiralty tied the cable to a tenth of a sea mile, about 608 feet. The figure used here follows the international nautical mile of 1,852 m, giving 185.2 m. Other definitions differ: a traditional British cable of 100 fathoms is 182.9 m, while the older US Navy cable of 120 fathoms is about 219.5 m. Sources therefore span roughly 169 to 220 m.

1 cable length = 185.2 meters (exactly).

Sources: Wikipedia: Cable length; Wikipedia: Nautical mile

Related conversions

See all length units.