Inches to Cable Lengths (in to cb)

1 inch equals 0.0001371490281 cable lengths (rounded).

1 inch = 0.0001371490281 cable lengths

How to convert inches to cable lengths

To convert inches to cable lengths, multiply the number of inches by 0.0001371490281. The factor is rounded to 10 significant digits. To go the other way, multiply cable lengths by 7,291.338583 (rounded).

cable lengths = inches × 0.0001371490281

Example: 10 inches = 0.001371490281 cable lengths.

About these units

Inch (in)

US & ImperialCurrent unit

1/12 of a foot. Defined as exactly 25.4 millimeters since 1959, when the US and Commonwealth countries agreed a common international inch.

Latin uncia, meaning one-twelfth, is the root of both inch and ounce, and it passed into Old English as ynce. Roman measurers divided their foot into twelve unciae, and the English inch kept that twelfth. After 1066 an inch was reckoned as three barleycorns, and a 1324 statute attributed to Edward II spelled out the definition as three grains of barley, dry and round, placed end to end lengthwise. For centuries the inch was simply a twelfth of a foot, or a thirty-sixth of a yard, and the US and UK each kept their own copy of the standard yard.

Those copies differed slightly until the 1959 international agreement fixed the yard at exactly 0.9144 meter, which made the inch exactly 25.4 millimeters. The US adopted it in 1959 and the UK ratified it in 1963, effective 1964. Today the inch is still the customary unit in the United States and Canada, and the UK keeps it on road signs. Worldwide it also names display diagonals, wheel rims, tire codes and pipe sizes.

1 inch = 0.0254 meters (exactly).

Sources: Wikipedia: Inch; Wikipedia: Yard; NIST Guide to the SI, Appendix B.8: conversion factors

Cable Length (cb)

NauticalTraditional unit (still used in some regions)

One tenth of a nautical mile (185.2 m). A traditional nautical measure for short distances between ships.

Before it became a figure on a chart, a cable was simply the thick rope that held a ship at anchor. Ropemakers worked on long covered ropewalks, and the length of the walk limited the longest rope they could lay. By the mid-sixteenth century the usual anchor cable was about 100 fathoms, or 600 feet, so the word turned into a measure of distance. The ropewalk at Chatham Dockyard is a quarter of a mile long, built to turn out standard coils of 120 fathoms.

Mariners found a cable handy for judging short gaps, such as the space between two ships in formation or the distance to a hazard. Because a nautical mile of 6,080 feet divides neatly by ten, the Admiralty tied the cable to a tenth of a sea mile, about 608 feet. The figure used here follows the international nautical mile of 1,852 m, giving 185.2 m. Other definitions differ: a traditional British cable of 100 fathoms is 182.9 m, while the older US Navy cable of 120 fathoms is about 219.5 m. Sources therefore span roughly 169 to 220 m.

1 cable length = 185.2 meters (exactly).

Sources: Wikipedia: Cable length; Wikipedia: Nautical mile

Related conversions

See all length units.