Palms to Millimeters (palm to mm)

1 palm equals 76.2 millimeters exactly.

1 palm = 76.2 millimeters

How to convert palms to millimeters

To convert palms to millimeters, multiply the number of palms by 76.2. This factor is exact. To go the other way, multiply millimeters by 0.01312335958 (rounded).

millimeters = palms × 76.2

Example: 10 palms = 762 millimeters.

About these units

Palm (palm)

Medieval EnglishHistorical unit (no longer in standard use)

3 inches (7.62 cm), about the breadth of a hand without the thumb. One of the oldest body-based units, used in many cultures with values of roughly 7 to 9 cm.

Open a hand flat and the part below the fingers gives the palm its name, which came through Old French from Latin palma, a word tied to a root meaning flat. As a measure it was the width of four fingers. Egyptian cubit-rods mark palms of about 7.5 cm from the reign of Djer in the First Dynasty, and Greek, Roman and Israelite palms fell between about 6.7 and 8.8 cm. In those systems three palms made a span and six a cubit.

In England the palm is given as 3 inches, or 7.62 cm, the figure used here, but the evidence is tangled, since the four-inch hand was sometimes confused with it and Wiktionary even glosses the English palm as four inches. Medieval Italy, France and Iberia used a much longer palm descended from the Roman greater palm, around 24.6 to 24.8 cm, while Morocco's was about 18.2 cm. The palm was left out of Britain's Weights and Measures Act of 1824 and is not a US customary unit.

1 palm = 0.0762 meters (exactly).

Sources: Wikipedia: Palm (unit); Wikipedia: Hand (unit); Wiktionary: palm

Millimeter (mm)

Metric (SI)Current unit

One thousandth of a meter. Used in engineering, manufacturing and rainfall measurement.

Carl Friedrich Gauss put the millimeter at the base of his 1832 proposal for absolute units, pairing it with the milligram and the second, although the centimeter-based CGS system later won out among scientists. The name combines the metric prefix milli-, from the Latin for one thousand, with the meter. Since 1983 a millimeter has been tied to the speed of light: it is the distance light covers in 1/299,792,458,000 of a second.

Millimeters are the language of fine mechanical work. Standard rulers are divided into them, digital calipers commonly read to 0.01 mm, and mechanical pencil leads come in 0.5 and 0.7 mm. Copy paper is about 0.1 mm thick, and a thin hair, at 0.02 to 0.04 mm across, is close to the smallest thing the naked eye can see. A wave with a frequency of 300 GHz has a wavelength of 1 mm. An inch is exactly 25.4 mm. One trap for readers in the United States is that mil there traditionally means a thousandth of an inch, not a millimeter.

1 millimeter = 0.001 meters (exactly).

Sources: Wikipedia: Millimetre; Wikipedia: Centimetre-gram-second system of units; NIST Guide to the SI, Appendix B.8: conversion factors

Related conversions

See all length units.