Meters to Roman Inches (m to uncia)

1 meter equals 40.6504065 Roman inches (rounded).

1 meter = 40.6504065 Roman inches

How to convert meters to Roman inches

To convert meters to Roman inches, multiply the number of meters by 40.6504065. The factor is rounded to 10 significant digits. To go the other way, multiply Roman inches by 0.0246.

Roman inches = meters × 40.6504065

Example: 10 meters = 406.504065 Roman inches.

Approximate value. Standards for the Roman inch (uncia) varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Roman Inch (uncia) (uncia)

Ancient RomanHistorical unit (no longer in standard use)Approximate value

One twelfth of a Roman foot, about 2.46 cm. Its name, uncia, is the root of the English words 'inch' and 'ounce'.

Twelve of these made up a Roman foot, and that fraction is the whole meaning of the name: uncia is Latin for a twelfth. The same word was applied to weight, where it gave the ounce as a twelfth of the Roman pound. Because the foot is about 296 mm, the uncia works out to roughly 24.6 mm, the value Wikipedia gives, though that article notes the figure lacks a citation. Any difference in the foot carries straight through to its inch.

Latin also had pollex, meaning thumb, as a synonym for the length. Old English borrowed uncia as ynce, and a regular sound change turned it into the modern word inch, which is a cousin of ounce. The English inch kept the idea of a twelfth of a foot but was later fixed by international agreement at exactly 25.4 mm, so it is about 3 percent larger than the Roman original.

1 Roman inch (uncia) = 0.0246 meters (approximately).

Sources: Wikipedia: Roman inch; Wikipedia: Inch; Wikipedia: Ancient Roman units of measurement

Related conversions

See all length units.