Meters to Egyptian Palms (m to palm)

1 meter equals 13.33333333 Egyptian palms (rounded).

1 meter = 13.33333333 Egyptian palms

How to convert meters to Egyptian palms

To convert meters to Egyptian palms, multiply the number of meters by 13.33333333. The factor is rounded to 10 significant digits. To go the other way, multiply Egyptian palms by 0.075.

Egyptian palms = meters × 13.33333333

Example: 10 meters = 133.3333333 Egyptian palms.

Approximate value. Standards for the Egyptian palm varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Meter (m)

Metric (SI)Current unit

The SI base unit of length. Since 1983 it is defined as the distance light travels in a vacuum in 1/299,792,458 of a second.

Meter comes from the Greek metron, a measure. In 1791 the French National Assembly defined it as one ten-millionth of the distance from the equator to the North Pole along a great circle through Paris, after rejecting the length of a seconds pendulum because that length changes with local gravity. The surveyors Delambre and Méchain measured the meridian arc, and in 1799 a platinum bar known as the Mètre des Archives became the physical standard. NIST notes that this Earth-based meter turned out to be about 0.2 mm shorter than the true pole-to-equator fraction it was meant to represent.

The 1875 Treaty of the Meter created the CGPM and the BIPM to look after common standards, and in 1889 a platinum-iridium prototype bar took over; the original is still kept at the BIPM. In 1960 the meter was tied to 1,650,763.73 wavelengths of an orange-red krypton-86 line, and in 1983 to the speed of light, which made length a quantity derived from the time standard. The 2018 revision reworded that definition without changing the meter's size. NIST offers a handy yardstick for scale: a pace, meaning two steps, is roughly a meter or a yard.

The meter is the reference unit for length on this site.

Sources: BIPM: history of the metre; NIST: the meter and the SI redefinition; Wikipedia: Metre

Egyptian Palm (palm)

Ancient EgyptianHistorical unit (no longer in standard use)Approximate value

One seventh of a royal cubit, about 7.5 cm. Four fingers (digits) made a palm.

Four finger widths side by side made one palm, the breadth of the hand across the knuckles without the thumb. Its Egyptian name is given as shesep, and modern writers also call it a hand or handsbreadth. Seven palms made a royal cubit, so the palm is a seventh of that rod and comes to 7.5 cm at a cubit of 52.5 cm. Ordinary common cubits in other cultures had only six palms, which is one reason Egyptian rods are easy to recognise.

Surviving rods show that the palm was a working division. Each rod was cut into seven palms, and the palms were split into fingers and finer fractions, so masons and carpenters could check a stone or a timber against a standard instead of their own hands. The palm shifts slightly with the cubit it comes from, since rods are measured at about 52.35 to 52.92 cm, giving palms of about 7.48 to 7.56 cm. Related units include the remen of five palms, about 37.5 cm, and a foot of four palms, close to 30 cm.

1 Egyptian palm = 0.075 meters (approximately).

Sources: Wikipedia: Ancient Egyptian units of measurement; Wikipedia: Cubit

Related conversions

See all length units.