Inches to Royal Cubits (in to cubit)

1 inch equals 0.04838095238 royal cubits (rounded).

1 inch = 0.04838095238 royal cubits

How to convert inches to royal cubits

To convert inches to royal cubits, multiply the number of inches by 0.04838095238. The factor is rounded to 10 significant digits. To go the other way, multiply royal cubits by 20.66929134 (rounded).

royal cubits = inches × 0.04838095238

Example: 10 inches = 0.4838095238 royal cubits.

Approximate value. Standards for the royal cubit varied by place and period, so this converter uses the most commonly cited value. Treat results as estimates, not exact figures.

About these units

Inch (in)

US & ImperialCurrent unit

1/12 of a foot. Defined as exactly 25.4 millimeters since 1959, when the US and Commonwealth countries agreed a common international inch.

Latin uncia, meaning one-twelfth, is the root of both inch and ounce, and it passed into Old English as ynce. Roman measurers divided their foot into twelve unciae, and the English inch kept that twelfth. After 1066 an inch was reckoned as three barleycorns, and a 1324 statute attributed to Edward II spelled out the definition as three grains of barley, dry and round, placed end to end lengthwise. For centuries the inch was simply a twelfth of a foot, or a thirty-sixth of a yard, and the US and UK each kept their own copy of the standard yard.

Those copies differed slightly until the 1959 international agreement fixed the yard at exactly 0.9144 meter, which made the inch exactly 25.4 millimeters. The US adopted it in 1959 and the UK ratified it in 1963, effective 1964. Today the inch is still the customary unit in the United States and Canada, and the UK keeps it on road signs. Worldwide it also names display diagonals, wheel rims, tire codes and pipe sizes.

1 inch = 0.0254 meters (exactly).

Sources: Wikipedia: Inch; Wikipedia: Yard; NIST Guide to the SI, Appendix B.8: conversion factors

Royal Cubit (cubit)

Ancient EgyptianHistorical unit (no longer in standard use)Approximate value

The standard Egyptian cubit of about 52.5 cm (20.7 in), divided into 7 palms of 4 fingers. Surviving cubit rods were used to lay out the pyramids.

Among the earliest standard measures on record is the royal cubit, written meh niswt, meaning the cubit of the king. The English word cubit comes from Latin cubitum, the elbow, since the unit was first the forearm. The Egyptian version ran longer than the common cubit, holding seven palms of four fingers, or 28 fingers, against 24 for the ordinary one. It appears in Old Kingdom building work from at least the Step Pyramid of Djoser, around 2700 BC.

Our knowledge of its size comes from physical rods. Richard Lepsius compared fourteen of them in 1865, and examples from the tombs of Maya at Saqqara and Kha at Thebes survive, one folding rod being in the Museo Egizio in Turin. Measured rods fall between about 523.5 and 529.2 mm, so the 52.5 cm used here is one common estimate within that range. In modern terms the cubit is roughly 20.6 to 20.8 inches, a little over half a metre.

1 royal cubit = 0.525 meters (approximately).

Sources: Wikipedia: Cubit; Wikipedia: Ancient Egyptian units of measurement

Related conversions

See all length units.