Feet to Pouces (ft to pouce)

1 foot equals 11.2597184 pouces exactly.

1 foot = 11.2597184 pouces

How to convert feet to pouces

To convert feet to pouces, multiply the number of feet by 11.2597184. This factor is exact. To go the other way, multiply pouces by 0.08881216781 (rounded).

pouces = feet × 11.2597184

Example: 10 feet = 112.597184 pouces.

About these units

Foot (ft)

US & ImperialCurrent unit

12 inches. Defined as exactly 0.3048 meters. Still the standard unit for height, altitude in aviation and room dimensions in the US and UK.

Human anatomy supplied the idea: an adult foot is roughly 15 percent of body height. Ancient cultures turned that into standards, but not the same one. The Greek pous was about 302 mm, the standard Roman pes about 295.7 mm, and a Harappan foot of about 335 mm has been reported from the Indus Valley. Historically, a foot fell somewhere between about 250 and 335 mm. Charlemagne tried to standardize units around 790 with little lasting success, and in 1593 English law fixed the statute mile at 5,280 feet.

The modern foot dates from the 1959 International Yard and Pound Agreement, which defined the yard as exactly 0.9144 meter and so the foot as exactly 0.3048 meter; the UK adopted it on 1 January 1964. The US survey foot, defined in 1893 as 1200/3937 meter, was deprecated on 31 December 2022. Feet remain in everyday use for height and rooms in the US, and ISO shipping containers are defined in them. Aviation altitudes use them too: flight level 330 means 33,000 feet.

1 foot = 0.3048 meters (exactly).

Sources: Wikipedia: Foot (unit); Wikipedia: Mile; NIST Guide to the SI, Appendix B.8: conversion factors

Pouce (pouce)

French (Ancien Régime)Historical unit (no longer in standard use)

The old French inch, about 2.707 cm; slightly longer than the English inch.

Pouce means thumb in French, the same body-part logic found in many inch-like units. In the royal system it was one twelfth of the pied du roi, which gives about 27.07 millimetres, or roughly 1.066 English inches. Each pouce was in turn divided into twelve lignes.

Craftsmen, surveyors and builders across France quoted lengths in pieds, pouces and lignes until the metric reforms of the 1790s, and the pouce was the natural unit for small dimensions. Because the French inch was slightly longer than the English one, converting between the two traditions always needs the exact ratio and not a rough equivalence.

The pouce shared the history of the foot it came from. Its size depended on the royal standard, which was an iron toise bar kept in Paris, and that bar was replaced after it was found deformed in 1668. Under the metric law of 1799 it was fixed in relation to the metre, and the same ratio is quoted today.

1 pouce = 0.02706994875 meters (approximately).

Sources: Wikipedia: Pied du roi; Wikipedia: Traditional French units of measurement; Wikipedia: Toise

Related conversions

See all length units.