Kbps to KB/s

1 kilobit per second equals 0.125 kilobytes per second exactly.

1 kilobit per second = 0.125 kilobytes per second

How to convert kilobits per second to kilobytes per second

To convert kilobits per second to kilobytes per second, multiply the number of kilobits per second by 0.125. This factor is exact. To go the other way, multiply kilobytes per second by 8.

kilobytes per second = kilobits per second × 0.125

Example: 10 kilobits per second = 1.25 kilobytes per second.

Network speeds are quoted in bits per second (lowercase b), while file sizes use bytes (uppercase B). Divide Mbps by 8 for MB/s.

About these units

Kilobit Per Second (kbps)

ComputingCurrent unit

1,000 bits per second. Used for voice calls and low-rate links.

Kilobit rates belong to the age of telephone wires. In 1962 AT&T introduced the Bell 103A, a full-duplex modem that sent 300 bit/s over ordinary phone lines, and by 1976 the Bell 212A had reached 1,200 bit/s. Speeds then climbed in steps through the 1990s, until the V.90 standard approved in 1998 offered 56 kbit/s downstream, with 33.6 kbit/s going the other way. That ceiling defined the dial-up era for many home users.

A kilobit per second is 1,000 bit/s, using the standard SI meaning of kilo, and it is still the natural unit for anything lightweight. A digital voice channel using PCM takes 64 kbit/s. MP3 files are often encoded at 128 kbit/s as a mid-range setting, with 320 kbit/s the highest the format supports. Divide by eight to get bytes: 8 kbit/s is 1 kB/s, so a 56 kbit/s modem moves about 7 kB/s, and fetching a 1 MB file over it would take roughly two and a half minutes.

1 kilobit per second = 1,000 bits per second (exactly).

Sources: Wikipedia: Modem (Bell 103, 212A, V.90 history); Wikipedia: Bit rate (voice and MP3 rates); Wikipedia: Kilobit

Kilobyte Per Second (kB/s)

ComputingCurrent unit

1,000 bytes per second (8 kbps). Download managers and browsers show speeds in kB/s.

Few units have had a messier history than the kilobyte. Computers had long used kilo for 1,024 because it is close to 1,000, and early floppy disks show the muddle: the Shugart SA-400 of 1976 held 109,375 bytes and was advertised as 110 Kbyte, while the Tandon double-density drive of 1978 held 368,640 bytes and was advertised as 360 KB. In 1998 the IEC specified that kilobyte should refer only to 1,000 bytes and created the kibibyte for 1,024.

The internationally recommended symbol is kB, and a kilobyte per second is 1,000 bytes per second, or 8 kbit/s. Browsers and download managers often report speeds this way, which is why a connection sold as 8 Mbit/s shows up as about 1,000 kB/s on a file transfer. Some software still divides by 1,024 and labels the result KB, so numbers from different programs may differ by a few percent.

1 kilobyte per second = 8,000 bits per second (exactly).

Sources: Wikipedia: Kilobyte; NIST: Prefixes for binary multiples; Wikipedia: Data-rate units

Related conversions

See all data transfer rate units.