Kbps to Gbps

1 kilobit per second equals 0.000001 gigabits per second exactly.

1 kilobit per second = 0.000001 gigabits per second

How to convert kilobits per second to gigabits per second

To convert kilobits per second to gigabits per second, multiply the number of kilobits per second by 0.000001. This factor is exact. To go the other way, multiply gigabits per second by 1,000,000.

gigabits per second = kilobits per second × 0.000001

Example: 10 kilobits per second = 0.00001 gigabits per second.

Network speeds are quoted in bits per second (lowercase b), while file sizes use bytes (uppercase B). Divide Mbps by 8 for MB/s.

About these units

Kilobit Per Second (kbps)

ComputingCurrent unit

1,000 bits per second. Used for voice calls and low-rate links.

Kilobit rates belong to the age of telephone wires. In 1962 AT&T introduced the Bell 103A, a full-duplex modem that sent 300 bit/s over ordinary phone lines, and by 1976 the Bell 212A had reached 1,200 bit/s. Speeds then climbed in steps through the 1990s, until the V.90 standard approved in 1998 offered 56 kbit/s downstream, with 33.6 kbit/s going the other way. That ceiling defined the dial-up era for many home users.

A kilobit per second is 1,000 bit/s, using the standard SI meaning of kilo, and it is still the natural unit for anything lightweight. A digital voice channel using PCM takes 64 kbit/s. MP3 files are often encoded at 128 kbit/s as a mid-range setting, with 320 kbit/s the highest the format supports. Divide by eight to get bytes: 8 kbit/s is 1 kB/s, so a 56 kbit/s modem moves about 7 kB/s, and fetching a 1 MB file over it would take roughly two and a half minutes.

1 kilobit per second = 1,000 bits per second (exactly).

Sources: Wikipedia: Modem (Bell 103, 212A, V.90 history); Wikipedia: Bit rate (voice and MP3 rates); Wikipedia: Kilobit

Gigabit Per Second (Gbps)

ComputingCurrent unit

1,000,000,000 bits per second. Fiber and Ethernet speeds are quoted in Gbps.

Gigabit Ethernet came in two stages. IEEE 802.3z, produced in June 1998, was the first version and required optical fiber. IEEE 802.3ab, ratified in 1999, defined 1000BASE-T over four twisted pairs of ordinary copper cabling, which is what turned a backbone technology into something that could reach desktops. Over time, one gigabit per second became a built-in feature of many computers.

A gigabit per second is 1,000,000,000 bit/s, or 125 MB/s once the eight bits in a byte are accounted for. At that speed an ideal transfer of a 4.7 GB single-layer DVD image takes about 38 seconds. Ten Gigabit Ethernet, first defined in IEEE 802.3ae in 2002 and extended to twisted pair by 802.3an in 2006, multiplies this by ten and is common in data centers. Cable and DSL providers also quote gigabit figures; the G.fast DSL standard from 2014 tops out at 1 Gbit/s.

1 gigabit per second = 1,000,000,000 bits per second (exactly).

Sources: Wikipedia: Gigabit Ethernet; Wikipedia: 10 Gigabit Ethernet; Wikipedia: Gigabyte (DVD capacity)

Related conversions

See all data transfer rate units.