GB/s to KB/s

1 gigabyte per second equals 1,000,000 kilobytes per second exactly.

1 gigabyte per second = 1,000,000 kilobytes per second

How to convert gigabytes per second to kilobytes per second

To convert gigabytes per second to kilobytes per second, multiply the number of gigabytes per second by 1,000,000. This factor is exact. To go the other way, multiply kilobytes per second by 0.000001.

kilobytes per second = gigabytes per second × 1,000,000

Example: 10 gigabytes per second = 10,000,000 kilobytes per second.

Network speeds are quoted in bits per second (lowercase b), while file sizes use bytes (uppercase B). Divide Mbps by 8 for MB/s.

About these units

Gigabyte Per Second (GB/s)

ComputingCurrent unit

1,000,000,000 bytes per second (8 Gbps). Memory and fast SSD bandwidth.

The gigabyte grew out of the same habit of rounding 1,024 to 1,000. In 1998 the IEC published binary prefixes, reserving gigabyte for the decimal value of 1,000,000,000 bytes and naming 1,073,741,824 bytes a gibibyte. Disk makers have used decimal capacities since the first disk drive, which is why a drive sold as 400 GB can appear as about 372 GB in Windows, while macOS, iOS and Android report decimal sizes.

A gigabyte per second is 1,000,000,000 bytes per second, equal to 8 Gbit/s. At that rate a 25 GB single-layer Blu-ray worth of data transfers in 25 seconds, and one hour of standard-definition video at 2.2 Mbit/s, about 1 GB, would pass in a single second. A 10 Gigabit Ethernet link, by comparison, tops out near 1.25 GB/s. Memory and storage interfaces tend to be described in this unit because their bandwidth is far beyond what ordinary networks offer.

1 gigabyte per second = 8,000,000,000 bits per second (exactly).

Sources: Wikipedia: Gigabyte; Wikipedia: 10 Gigabit Ethernet; NIST: Prefixes for binary multiples

Kilobyte Per Second (kB/s)

ComputingCurrent unit

1,000 bytes per second (8 kbps). Download managers and browsers show speeds in kB/s.

Few units have had a messier history than the kilobyte. Computers had long used kilo for 1,024 because it is close to 1,000, and early floppy disks show the muddle: the Shugart SA-400 of 1976 held 109,375 bytes and was advertised as 110 Kbyte, while the Tandon double-density drive of 1978 held 368,640 bytes and was advertised as 360 KB. In 1998 the IEC specified that kilobyte should refer only to 1,000 bytes and created the kibibyte for 1,024.

The internationally recommended symbol is kB, and a kilobyte per second is 1,000 bytes per second, or 8 kbit/s. Browsers and download managers often report speeds this way, which is why a connection sold as 8 Mbit/s shows up as about 1,000 kB/s on a file transfer. Some software still divides by 1,024 and labels the result KB, so numbers from different programs may differ by a few percent.

1 kilobyte per second = 8,000 bits per second (exactly).

Sources: Wikipedia: Kilobyte; NIST: Prefixes for binary multiples; Wikipedia: Data-rate units

Related conversions

See all data transfer rate units.