Square Yards to Square Millimeters (yd² to mm²)

1 square yard equals 836,127.36 square millimeters exactly.

1 square yard = 836,127.36 square millimeters

How to convert square yards to square millimeters

To convert square yards to square millimeters, multiply the number of square yards by 836,127.36. This factor is exact. To go the other way, multiply square millimeters by 0.000001195990046 (rounded).

square millimeters = square yards × 836,127.36

Example: 10 square yards = 8,361,273.6 square millimeters.

About these units

Square Yard (yd²)

US & ImperialCurrent unit

9 square feet (0.8361 m²). Used for carpet, turf and land in the UK and India (where it is called a gaj).

Branches and rods lie behind this unit. The word yard comes from Old English gerd or gyrd, meaning a staff or measuring rod, and it first appears in the late seventh-century laws of Ine of Wessex, where a yard of land was a tax unit. Where its length came from is uncertain: pacing, the cubit and the arm of King Henry I have all been suggested. A square yard is simply a square of that length on each side.

After the 1959 agreement among six countries fixed the yard at exactly 0.9144 meter, the square yard became exactly 9 square feet, 1,296 square inches or about 0.836 m². It is used across the English-speaking world, notably in the United States, United Kingdom, Canada, India and Pakistan. In northern India it is called a gaj, and in Pakistan a gaz, and house plots there are often quoted in it. In the US and UK the yard, divided into eighths, is also how cloth is bought, so the square yard suits flooring and fabric in the same breath.

1 square yard = 0.83612736 square meters (exactly).

Sources: Wikipedia: Square yard; Wikipedia: Yard; NIST Guide to the SI, Appendix B.8: conversion factors

Square Millimeter (mm²)

Metric (SI)Current unit

A square one millimeter on a side. Used for the cross-section of wires and small parts.

Gauss gets the credit for putting the millimeter at the base of a scientific measuring system. His 1832 proposal for absolute units used the millimeter, milligram and second, although the centimeter-based CGS system later won out among scientists. The square millimeter is a one-thousandth-by-one-thousandth square of a meter, so it takes a million of them to make a square meter, and it has no famous inventor of its own.

Electricians know it best. Wire and cable sizes are given as the cross-sectional area of the copper conductor, and the standard sizes listed for UK domestic wiring are 1, 1.5, 2.5, 4, 6 and 10 mm². Twin and earth cable of 2.5 mm² typically serves sockets on a 16 A radial or 32 A ring circuit, 1 mm² serves lighting on a 6 A breaker, and 4 mm² feeds a cooker or shower. Conductor size depends on current capacity and allowed voltage drop, not on voltage alone. One square inch is exactly 645.16 mm², so small parts in either system compare easily.

1 square millimeter = 0.000001 square meters (exactly).

Sources: Wikipedia: Electrical wiring in the United Kingdom; Wikipedia: Centimetre-gram-second system of units; Wikipedia: Square metre

Related conversions

See all area units.