Se to Square Inches (se to in²)

1 se equals 153,719.3157 square inches (rounded).

1 se = 153,719.3157 square inches

How to convert se to square inches

To convert se to square inches, multiply the number of se by 153,719.3157. The factor is rounded to 10 significant digits. To go the other way, multiply square inches by 0.000006505363333 (rounded).

square inches = se × 153,719.3157

Example: 10 se = 1,537,193.157 square inches.

About these units

Se (se)

JapaneseTraditional unit (still used in some regions)

30 tsubo, about 99.17 m².

Between the humble tsubo and the field-sized tan sits the se, a plot of 30 tsubo. In square metres that is exactly 12,000/121, or about 99.17, which is just under one are, the metric land unit of 100 square metres. A se measures roughly ten metres by ten, a small garden or a slice of a paddy.

The scale is decimal above this point. Ten se make one tan, and a hundred se make one cho, so the se works as the first step in the farmland ladder rather than a unit with a life of its own. Property listings today seldom use it, and it is mostly met in old land records and in conversion tables.

Its exact size comes from the Meiji legal definition. The 1891 law set the shaku at 10/33 metre, and the tsubo as the square of six shaku, so every larger land unit built on the tsubo inherited a fixed metric value. Before that, the shaku itself varied by era and use.

1 se = 99.17355372 square meters (approximately).

Sources: Wikipedia: Japanese units of measurement; Wikipedia: Shaku (unit); Wikipedia: Tsubo

Square Inch (in²)

US & ImperialCurrent unit

A square one inch on a side, exactly 6.4516 cm². Used for small parts and for pressure (pounds per square inch).

Latin uncia, one twelfth, gave English the inch, which Old English borrowed as ynce. A statute of Edward II in 1324 defined it as three barleycorns, dry and round, set end to end, and the barleycorn remained the base for centuries after 1066. The modern square inch rests on a 20th-century agreement: the United States adopted a yard of exactly 0.9144 meter on 1 July 1959, the United Kingdom followed effective 1 January 1964, and the inch became exactly 25.4 mm.

Squaring that gives exactly 6.4516 cm² for one square inch, and one square meter is about 1,550 of them. Its best-known descendant is the pound per square inch, psi, the pressure unit still used for American tires and air tanks: atmospheric pressure at sea level is about 14.7 psi, a car tire is typically inflated to around 32 psi above the surrounding air, and one psi is about 6.895 kilopascals. The square inch itself is common in the US and UK for small parts and printed material.

1 square inch = 0.00064516 square meters (exactly).

Sources: Wikipedia: Square inch; Wikipedia: Inch; Wikipedia: Pounds per square inch

Related conversions

See all area units.